Nexa3D xCE-Black

Product families

Other characteristics

Density

1100.0 - 1100.0 kg/m³

End Uses

Automotive Components, Automotive Interior Parts, Automotive Under The Hood, Electrical/Electronic Applications, Industrial Applications, Molds/Dies/Tools, Power/Other Tools, Prototyping

Tensile Strength

67.0 - 71.0 MPa

Processing Methods

3D Printing, Digital Light Processing, Stereolithography

Color

Black

Markets

• Automotive & Transportation
• Electrical & Electronics
• Industrial

Appearance

Black

Technology

Plastics

Use Direction

This product is light sensitive; exposure to daylight, UV light and artificial lighting should be kept to a minimum during storage and handling.; Shake or stir Nexa3D xCE-Black well before use.; Agitate resin before each print.; Do not leave resin in printer tray when not in use.

Material Features

• Chemical Resistant
• Durable
• Good Aesthetics
• Good Isotropy
• High Flexural Modulus
• High Performance
• High Stiffness
• High Temperature Application
• 1 more

Storage Information

Store product in the unopened container in a dry location.; Storage information may be indicated on the product container labeling.; Optimal Storage : 8°C to 21°C.; Storage below 8°C or greater than 28°C can adversely affect product properties.; Material removed from containers may be contaminated during use. Do not return product to the original container. Nexa3D cannot assume responsibility for product which has been ontaminated or stored under conditions other than those previously indicated.

Show in full

Chemical Compatibility

Compatibility of 3D-printed and post-cured resin parts were tested with several chemicals. From several resins, blocks of 20 x 20 x 20 mm were printed and postcured according to the table below. The weight of the blocks were measured before the test and after 24 hour immersion in the specific chemical solution. Before weighing the surface of the immersed blocks were wiped dry.. * Sodium Hydroxide had a soft outer surface.

Show in full

3D Printing Machine Settings

Cure rate and ultimate depth of cure depend on light intensity, spectral distribution of the light source, exposure time and light transmittance of the printer window through which the light must pass.

Plastics and Elastomers End Uses

• Automotive Components
• Automotive Interior Parts
• Automotive Under The Hood
• Electrical/Electronic Applications
• Industrial Applications
• Molds/Dies/Tools
• Power/Other Tools
• Prototyping

Plastics and Elastomers Functions

Resin

Recommended Post Print Processing

Rinse the printed part using an approved cleaner to remove uncured resin; The use compressed air or impregnated wipes to remove excess residual solvent from the surface is recommended; Remove any support structures prior to any post-curing step

Plastics and Elastomers Processing Methods

• 3D Printing
• Digital Light Processing
• Stereolithography