Technicoll® 8150
Technicoll® 8150 is a contact adhesive, sprayable.
Product families
- Contact Adhesives
Other characteristics
- Brand
- Technicoll
- Product Type
- Contact Adhesive
- Application Method
- Spray
- Compatible Substrates & Surfaces
Aluminum, Concrete, Fiberglass, Metal, Plastics, Wood
- Base
- Styrene-Butadiene Rubber (SBR)
- Markets
- Adhesives & Sealants
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Usage
Surface preparation; Bonding surfaces must be dry and clean, especially free of oil, grease or release agents. In many cases, surface roughening prior to bonding improves strength of bonded joint. It is recommended when working with rubber and metals.; Adhesion; Stir adhesive before use. Apply a thin layer of technicoll® 8150 equally to both sides of the bonding surface of the substrates (brush, spraying gun). After the application solvent needs to evaporate. The usual waiting time is just a few minutes. It depends on the applied amount of adhesive and the indoor climate. The right time for the bonding has come as soon as the applied adhesive does not pull strings anymore when touching with the finger, but still feels very sticky. Join the substrates together accurately and assemble quickly under high pressure. The good bond strength that is achieved immediately, usually allows further processing with the bonded substances right away. In some cases a one-sided application might be possible: Apply a thick layer of technicoll® 8150 equally to one side and join both surfaces immediately. Wait for a couple of days before assessing the final strength.
- Application Methods
- Spray
- Favoured Substrates
Foam material (unplasticised); Metal; Glass fiber mats with:; Concrete, render; Felt; Aluminum foil; Mineral fiber mats; Derived timber products; Plastic films (unplasticised); Not suitable for: PE, PP, PTFE (Teflon®), POM, silicone, EPDM, PVC-p (faux leather); Due to the large variety of possible materials and differences in adhesion behavior hazard tests are mandatory before introducing the adhesive into the actual production process.
- Handling Properties
Dilution - Not Necessary.; Cleaning - Cured adhesive can only be removed mechanically.
- Field of Application
Bonding of insulation materials such as unplasticised foam material, mineral fiber mats, glass fiber mats, felt, metal, render, concrete, bituminised felts, aluminum foils and different kinds of unplasticised polymeric films.
- Maximum Time Of Storage
At least 1.5 year when stored in sealed original packaging in cool and dry places.
- Special Characteristics
Technicoll® 8150 is a sprayable, unfilled contact adhesive with a long open time and resistant to water, humidity and heat.
- Behaviour At Low Temperature
Not susceptible to frost. Densification at low temperature. Once adjusted to processing temperature: fully employable.
- Preferred Storage Temperature
- 10°C - 25°C
- Ready to Use Product Features
- Heat Resistance
- Humidity Resistant
- Long Open Time
- Water Resistant
- Compatible Substrates and Surfaces
- Aluminum
- Concrete
- Fiberglass
- Metal
- Plastics
- Wood
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (20°C) | approx. 275 | mPas |
| Solid Content | approx. 35 | % |
| Density | approx. 0.8 | g/cm³ |
| Application Temperature | 15 - 25 | °C |
Table 2 of 2
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Time | min. 3 | minutes |
| Contact Life (Depending On Temperature, Substrate And Quantity Of Adhesive) | approx. 30 | minutes |
| Way Of Application | Two-sided | — |
| Consumption | 150 - 250 | g/m² |
| Cleaning Agent / Material | Technicoll® 8363 | — |
| Cleaning Agent / Material (Metal Cleaning Spray) | Technicoll® 9901 | — |
| Cleaning Agent / Material (Plastics Cleaning Spray) | Technicoll® 9902 | — |
| Cleaning Agent / Tool (Technicoll® 8367, Spray) | Technicoll® 9901 | — |
| Cleaning Agent / Tool (Technicoll® 8363, Spray) | Technicoll® 9901 | — |
