Technicoll® 9110

Product families

Other characteristics

Brand

Technicoll

Product Type

Contact Adhesive

Application Area

Textiles

Compatible Substrates & Surfaces

Acrylonitrile Butadiene Styrene (ABS), Composites, Elastomers & Rubbers, Fibers & Fabrics, Leather, Metal, Poly(Methyl Methacrylate) (PMMA), Polyethylene (PE), Polyethylene Terephthalate (PET), Polyethylene Terephthalate Glycol (PET-G), Polyoxymethylene (POM), Polypropylene (PP), Polystyrene (PS), Polyvinyl Chloride (PVC), Textiles, Wood

Show in full

Base

Synthetic Elastomers

Markets

• Consumer Goods
• Industrial

Technology

Ready-to-Use Products

Usage

Surface preparation; Bonding surfaces must be dry and clean, especially free of oil, grease or release agents. In many cases, surface roughening prior to bonding improves strength of bonded joint. It is recommended when working with rubber and metals.; Adhesion; Stir adhesive before use. Apply a thin layer of technicoll® 9110 equally to both sides of the bonding surface of the substrates (brush, spraying gun). After the application solvent needs to evaporate. The usual waiting time is just a few minutes. It depends on the applied amount of adhesive and the indoor climate. The right time for the bonding has come as soon as the applied adhesive does not pull strings anymore when touching with the finger, but still feels very sticky. Join the substrates together accurately and assemble quickly under high pressure. The good bond strength that is achieved immediately, usually allows further processing with the bonded substances right away. Wait for a couple of days before assessing the final strength.

Show in full

Favoured Substrates

PE (HDPE, LDPE) PP, POM; PA, PET, PETG; PVC-n (unplasticised), PMMA, ABS, PS; Polyester; Derived timber products; GFRP, CFRP; Metals (blank, coated); Fabrics, leather, textile; Rubber; Glass; Not suitable for: PE-films, PTFE (Teflon®), silicone, EPDM, plasticised materials (PVCplasticised), faux leather, PS-rigid foam (e.g. Styrofoam®); Due to the large variety of possible materials and differences in adhesion behavior hazard tests are mandatory before introducing the adhesive into the actual production process.

Show in full

Handling Properties

Cleaning - Cured adhesive can only be removed mechanically.

Field of Application

Technicoll® 9110 is suitable for contact bonding of many plastics, especially for substrates difficult to bond like PE, PP and POM. technicoll® 9110 is highly resistant to moisture, aging and is characterized by a high initial tack and a long contact life.

Maximum Time Of Storage

At least 15 months when stored in sealed original packaging in cool and dry places.

Behaviour At Low Temperature

Not susceptible to frost. Densification at low temperature. Once adjusted to processing temperature: fully employable.

Preferred Storage Temperature

10°C - 25°C

Ready to Use Product Features

• Good Moisture Resistance
• Improved Ageing Resistance
• Tacky

Compatible Substrates and Surfaces

• Acrylonitrile Butadiene Styrene (ABS)
• Composites
• Elastomers & Rubbers
• Fibers & Fabrics
• Leather
• Metal
• Poly(Methyl Methacrylate) (PMMA)
• Polyethylene (PE)
• 8 more