Technicoll® 9129
Technicoll® 9129 is a multipurpose adhesive, sprayable, red in color.
Product families
Applications
- Consumer Goods — Carpet & Upholstery
- Consumer Goods — Footwear
- Carpet & Upholstery
- Textile Manufacturing
Product Families
- Contact Adhesives
Other characteristics
- Brand
- Technicoll
- Product Type
- Contact Adhesive
- Application Area
- Textiles, Upholstery
- Textiles
- Upholstery
- Application Method
- Spray
- Compatible Substrates & Surfaces
Elastomers & Rubbers, Paper, Polyurethane, Textiles, Wood
- Base
- SBS-rubber
- Markets
- Consumer Goods
- HI&I Care
- Industrial
- Technology
- Ready-to-Use Products
- Usage
Surface preparation; Bonding surfaces must be dry and clean, especially free of oil, grease or release agents.; Adhesion; Apply a thin layer of technicoll® 9129 equally to both sides of the joint surfaces. (brush, roll, spraying gun). After the application solvent needs to evaporate. The usual waiting time is just a few minutes. It depends on the applied amount of adhesive and the indoor climate. The right time for the bonding has come as soon as the applied adhesive does not pull strings anymore when touching with the finger, but still feels very sticky. Join the substrates together accurately and assemble quickly under high pressure. The good bond strength that is achieved immediately, usually allows further processing with the bonded substances right away. Adhesion has a high initial strength. Wait for a couple of days before assessing the final strength.
- Application Methods
- Spray
- Favoured Substrates
Flexible foam (poly ether, poly ester); Derived timber products; Non-woven materials, jute, cotton; Rubber hair; Upholstery materials, textiles; Upholstery materials (unplasticised); Paperboard; PUR; Not suitable for: PE, PP, PTFE (Teflon®), POM, silicone, EPDM, PVC-plasticised (faux leather); Due to the large variety of possible materials and differences in adhesion behavior hazard tests are mandatory before introducing the adhesive into the actual production process.
- Handling Properties
Dilution - Not Necessary, Possible With Technicoll® 8367.; Cleaning - Cured adhesive can only be removed mechanically.
- Field of Application
Technicoll® 9129 is a sprayable contact adhesive with high initial tack for bonding upholstery foam with upholstery fabrics, derived timber products, paperboard and non-woven material.
- Maximum Time Of Storage
At least 1 year when stored in sealed original packaging in cool and dry places.
- Behaviour At Low Temperature
Not susceptible to frost. Densification at low temperature. Once adjusted to processing temperature: fully employable.
- Preferred Storage Temperature
- 10°C - 25°C
- Ready to Use Product Features
- Tacky
- Compatible Substrates and Surfaces
- Elastomers & Rubbers
- Paper
- Polyurethane
- Textiles
- Wood
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (20°C) | approx. 500 | mPas |
| Solid Content | approx. 50 | % |
| Processing Temperature | 15 - 25 | °C |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Time (One-sided Application) | 0.5 - 5 | minutes |
| Drying Time (Two-sided Application) | 0.5 - 15 | minutes |
| Contact Life | max. 15 | minutes |
| Way Of Application | One- And Two-sided | — |
| Consumption (Two-sided Application) | approx. 150 - 300 | g/m² |
| Cleaning Agent / Tool (Technicoll® 8363, Spray) | Technicoll® 9901 | — |
