Technicoll® 9119

Product families

Other characteristics

Brand

Technicoll

Product Type

Contact Adhesive

Application Area

Textiles

Application Method

Spray

Compatible Substrates & Surfaces

Ceramic, Fibers & Fabrics, Glass, Metal, Plastics, Polyurethane, Textiles, Wood

Base

Styrene-Butadiene-Styrene (SBS)

Markets

• Consumer Goods
• Industrial

PACKAGING

500 ml spray can.

Technology

Ready-to-Use Products

Usage

Surface preparation; Bonding surfaces must be dry and clean, especially free of oil, grease or solvents. Use technicoll® 8363 for cleaning surfaces of plastics. In many cases, surface roughening prior to bonding improves strength of bonded joint.; Adhesion; Shake can before use! Spray technicoll® 9119 equally in a thin layer from a distance of approx. 30 cm on the substrate. When applying the adhesive to one side of porous substrates, the substrates can be joined together immediately or after a short drying time (< 10 minutes). For contact bonding apply the adhesive to both sides. Then the solvent needs to evaporate. The usual waiting time is just a few minutes. It depends on the applied amount of adhesive and the indoor climate. The right time for bonding has come as soon as the applied adhesive does not pull strings anymore when touching with the finger, but still feels very sticky. Join the substrates together accurately and assemble quickly under high pressure. A good bonding strength is achieved immediately and usually allows further processing with the bonded substances right away. Adhesion has a high initial strength. Wait for a couple of days before assessing the final strength. When bonding diffusion closed substrates or Styropor®, only a contact bonding with a doublecoated application is possible. In order to clean the splash valve, turn can around after use and spray until only propellant gas is emitted.

Show in full

Application Methods

Spray

Storage Condition

Maximum time of storage - At least 2 years when stored in sealed original packaging in cool and dry places.; Pressurized container.; Do not pierce or burn, even after use.; Protect from sunlight.; Do no expose to temperatures exceeding +50 °C.

Favoured Substrates

Paper, paperboard, photo base paper; Derived timber products; Plastic foils (plasticised); Glass; Fabrics, jute, textile, cork to each other as well to; Ceramics; Insulating material, glass wool; Metals; Flexible foam (polyurethane, latex); Rigid foam (also Styropor®); Not suitable for: PE, PP, PTFE (Teflon®), POM, silicone, EPDM, PVC-p (faux leather); Due to the large variety of possible materials and differences in adhesion behavior hazard tests are mandatory before introducing the adhesive into the actual production process.

Show in full

Handling Properties

Cleaning - Cured adhesive can only be removed mechanically.

Field of Application

Technicoll® 9119 is a multipurpose adhesive with a precise, equal spray pattern and a wide splash valve. The spray adhesive is suitable for permanent bonding of many different combinations of materials, especially for the graphics sector.

Behaviour At Low Temperature

Not susceptible to frost. Densification at low temperature. Once adjusted to processing temperature: fully employable.

Preferred Storage Temperature

10°C - 25°C

Ready to Use Product Features

Good Adhesion

Compatible Substrates and Surfaces

• Ceramic
• Fibers & Fabrics
• Glass
• Metal
• Plastics
• Polyurethane
• Textiles
• Wood