Truco 8101 Acrylic Elastomeric Coating
- Chemical Family
- Acrylics & Acrylates
Truco 8101 Acrylic Elastomeric Coating is an acrylic flexible liquid membrane coating specially formulated for use on concrete block, masonry, stucco, and where esthetic appearance of the building is desired. The white or pastel colors reflect the sun’s rays and allow the surface to remain cool, thus saving energy.
Properties
- Physical Form
- Liquid
Product families
Applications
- Concrete Coatings & Stains
- Architectural Coatings
Product Families
- Protective Coatings
Other characteristics
- Features
Durable, Excellent Substrate Adhesion, Flexible, Good Weather Stability
- Product Type
- Elastomeric Coating, Waterborne Coating
- Elastomeric Coating
- Waterborne Coating
- Application Area
- Stucco
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Concrete, Metal, Polyurethane
- Color
- Custom
- Markets
- Building & Construction
- Paints & Coatings
- Technology
- Ready-to-Use Products
- Identification
- 1 gallon
- 5 gallons
- 55 gallons
- Application Methods
- Spray
- Applicable Roof Types
Prolonged exposure to UV radiation from the sun can take a toll on TPO single-ply roofing systems,causing them to chalk heavily and develop pinholes and surface cracks. When the reinforcement scrim is exposed, the roofing membrane fails. TRUCO Coatings elastomeric roof coating not only protects TPO roofing from the sun, but also resists moisture and extreme weather for lasting durability. Silicone solutions for commercial building roofs provide long-lasting leak protection.
- Freeze Thaw Stability
- Excellent
- Ready to Use Product Features
- Durable
- Excellent Substrate Adhesion
- Flexible
- Good Weather Stability
- Compatible Substrates and Surfaces
- Concrete
- Metal
- Polyurethane
Technical data
Table 1 of 1
20 rows| Characteristic | Value | Unit |
|---|---|---|
| Weight per Gallon | approx. 12.4 | — |
| Viscosity (80ºF) | 110 - 120 | KU |
| Non-Volatile Content | min. 65 | % |
| Percent Latex Solids | min. 20 | % |
| Percent Solids (By Volume) | min. 50 | % |
| Dry Film Thickness (Gal/100 Sq. Ft., Less Absorption By Surface) | 8.0 | Mils |
| Drying Time (To Touch, On Metal) | 1.5 | hours |
| Drying Time (Through Metal, 77ºF, 50% Rh) | 3.5 | hours |
| Cold Temperature Flex. (1” Mandrel, 0ºF) | No Cracks | — |
| Service Temperature Extended Exposure | -30 to 200 | ºF |
| Ultra Violet Light Resistance | Excellent | — |
| Effect Of Weathering | Slight Chalking | — |
