Truco 9600 Sure Seal Silicone Coating
- Chemical Family
- Silicones
Truco 9600 Sure Seal Silicone Coating is a high solid, low VOC, one-part silicone elastomeric coating specifically designed for use in roofing applications as a protective coating over a variety of roofing substrates. Once cured this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, TRUCO 9600 provides greater UV protection than similar silicone coatings and offers increased resistance to moisture penetration. TRUCO 9600 provides excellent long term protection through exceptional weatherability properties.
Product families
Applications
- Waterproofing & Weatherproofing
Product Families
- Protective Coatings
Other characteristics
- Features
Durable, Flexible, Good Moisture Resistance, Good UV Protection, Good Weather Stability, High Solids Content, Low VOC, Water Resistant
- Product Type
1K (1 component) Coating, Elastomeric Coating, Solventless & High Solids Coating; 1K (1 component) Coating; Elastomeric Coating; Solventless & High Solids Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
Ethylene Propylene Diene Monomer (EPDM), Polyvinyl Chloride (PVC), Thermoplastic Polyolefin (TPO)
- Color
- Custom
- Markets
- Building & Construction
- Thinner
- Not Recommended
- Shelf LIfe
- 12 months at 50- 85°F
- Technology
- Ready-to-Use Products
- Labeling Claims
- Low VOC
- Recommended Uses
TRUCO 9600 was specifically developed as a protective coating for EPDM, TPO, PVC, modified bitumen, and smooth BUR.. With excellent adhesion and durability, TRUCO 9600 is proven to provide excellent UV protection and long term durability for spray polyurethane foam.
- Application Methods
- Brush
- Roller
- Spray
- Application Instructions
TRUCO 9600 may be applied by medium nap rollers, soft brushes or high pressure airless spray equipment. Apply TRUCO 9600 only to clean, dry, sound surfaces free of loose particles or other foreign matter. For best results, ambient temperature should be between 50-90°F.; Higher temperatures will shorten the cure time and working time for proper application of granules before the material has skinned. Lower temperatures will lengthen the skinover, tack free and ultimate cure time. Sudden temperature declines may also result in dew formation on surfaces, which can prevent adhesion development. For best results, relative humidity should be above 20%.; Lower humidity will slow the cure time significantly. Apply TRUCO 9600 at the rate of 1.25 gallons per 100 sq. ft. Minimum dry mil thickness shall be above 20 mils. Two passes of silicone and a primer coat may be required for some applications and warranty programs. Product application should be suspended immediately and our technical service personnel contacted if the results being obtained are less than desirable.
- Limitations and Precautions
Avoid contamination in sealed containers. Store away from heat and sources of ignition.. Do not inhale vapor or mist; do not get on skin, in eyes or on clothing.
- Ready to Use Product Features
- Durable
- Flexible
- Good Moisture Resistance
- Good UV Protection
- Good Weather Stability
- High Solids Content
- Low VOC
- Water Resistant
- Compatible Substrates and Surfaces
- Ethylene Propylene Diene Monomer (EPDM)
- Polyvinyl Chloride (PVC)
- Thermoplastic Polyolefin (TPO)
Technical data
Table 1 of 1
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Total Solids (Volume) | 96.0 | % | ASTM D2697 |
| Weight Per Gallon | 10.7 | lbs per gallon | — |
| Flash Point | 160.0 | °F | — |
| Viscosity | 4800 - 9000 | CPs | — |
| Elongation (t 50) | 249.0 | % | — |
| Tensile Strength (t 50) | 325.0 | psi | — |
| Permeability | 4.2 | perms | — |
| Service Temperature | -50 to 200 | °F | — |
| Solar Reflectance | 87.0 | % | — |
| Thermal Emittance | 89.0 | % | — |
| Cure Times | 2 - 8 | Hours | — |
| Tack Free | 1.0 | Hour | — |
