NUDEC® PET
NUDEC® PET's brightness and transparency make NUDEC®PET the ideal product for advertising elements. They also possess high resistance to the chemical attack of acid rain, diesel engine exhaust fumes and air with a certain amount of salinity, which makes them very useful outside in their UV version.
Properties
- Physical Form
- Sheets
Other characteristics
- Brand
- NUDEC
- Density
- 1340.0 - 1340.0 kg/m³
- Features
Chemical Resistant, Excellent Transparency Properties, Flame Retardant, Good Brightness, Good Impact Strength, Low Smoke Emission
- Polymer Name
- Polyethylene Terephthalate (PET)
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Storage
An incorrect storage position can lead to permanent deformation.; The sheets should be stored in closed premises that guarantee normal environmental conditions.; The sheets should be stored one on top of the other on flat horizontal surfaces and fully supported over their total area.; The topmost panel should be covered with a sheet of polyethylene or cardboard etc.; NUDEC®PET sheets must not be stored in direct sunlight or under conditions of high humidity and/or temperature as this can have a negative effect of protective film adhesion.
Technical data
Table 1 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Ball Pressure Hardness | 117.0 | MPa | ISO 2039 |
| Charpy Impact Test | No breakage | kJ/m² | ISO 179 |
| Elasticity Modulus in Traction | 86.0 | MPa | ISO 527 |
| Elongation (Breakage) | No breakage | % | ISO 527 |
| Resistance to Flexion | 2420.0 | MPa | ISO 178 |
| Rockwell Hardness (M/R Scale) | /111 | MPa | ASTM D-785 |
| Tensile Strength (Breakage) | No breakage | MPa | ISO 527 |
| Tensile Strength (Yield) | 59.0 | MPa | ISO 527 |
Table 2 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.34 | g/cm³ | ISO 1183 |
Table 3 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | max. 6 | 10⁻⁵ / °C | ISO 75-2 |
| Heat Deflection Temperature B (0.45 Mpa) | 73.0 | °C | ISO 75-2 |
| Heat Deflection Temperature A (1.8 Mpa) | 69.0 | °C | ISO 75-2 |
| Maximum Service Temperature | 60.0 | °C | — |
| VICAT Softening Temperature (10 N) | 79.0 | °C | ISO 306 |
| VICAT Softening Temperature (10 N) | 75.0 | °C | ISO 306 |
Table 4 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Light Transmission | 89.0 | % | ASTM D-1003 |
| Refractive Index | 1.576 | — | ASTM D-542 |
