NUDEC® SANuv
NUDEC® SANuv plastic sheets are defined by many properties but, from among them, special mention should be made of their good chemical resistance and mechanical strength. NUDEC® SANuv sheets incorporate UV additives that protect them from UV radiation, which allows them to maintain their optical properties in outside application for many years. These sheets possess excellent rigidity, even in small thicknesses. Because of their ease of handling, they are ideal for industrial parts, glazing, packaging and containers.
Properties
- Physical Form
- Sheets
Other characteristics
- Brand
- NUDEC
- Density
- 1080.0 - 1080.0 kg/m³
- Features
Durable, Ease of Handling, Excellent Mechanical Strength, Excellent Transparency Properties, Good Brightness, Good Optical Properties, High Hardness, High Rigidity, Low Water Absorption
- Polymer Name
- Styrene Acrylonitrile Copolymer (SAN)
- Tensile Modulus
- 3700.0 - 3700.0 MPa
- Markets
- Building & Construction
- Electrical & Electronics
- Storage
An incorrect storage position can lead to permanent deformation.; The sheets should be stored in closed premises that guarantee normal environmental conditions.; The sheets should be stored one on top of the other on flat horizontal surfaces and fully supported over their total area.; The topmost panel should be covered with a sheet of polyethylene or cardboard etc.; NUDEC®SANuv sheets must not be stored in direct sunlight or under conditions of high humidity and/or temperature as this can have a negative effect of protective film adhesion.
Technical data
Table 1 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Ball Pressure Hardness | 165.0 | MPa | ISO 2039 |
| Charpy Impact Strength Notched | 1.28 | kJ/m² | ISO 179 |
| Charpy Impact Strength Un-Notched | 17.0 | kJ/m² | ISO 179 |
| Elongation (Breakage) | 2.5 | % | ISO 527 |
| Flexural Strength | 97.0 | % | ISO 527 |
| Rockwell Hardness (M/R Scale) | 83/ | MPa | ASTM D-785 |
| Tensile Modulus of Elasticity | 3700.0 | MPa | ISO 527 |
| Tensile Strength (Breakage) | 67.0 | MPa | ISO 527 |
Table 2 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.08 | g/cm³ | ISO 1183 |
Table 3 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | 7.0 | 10⁻⁵ / °C | ISO 75-2 |
| Heat Deflection Temperature B (0.45 Mpa) | 101.0 | °C | ISO 75-2 |
| Heat Deflection Temperature A (1.8 Mpa) | 98.0 | °C | ISO 75-2 |
| Maximum Service Temperature | 85.0 | °C | — |
| VICAT Softening Temperature (10 N) | 108.0 | °C | ISO 306 |
| VICAT Softening Temperature (10 N) | 105.0 | °C | ISO 306 |
Table 4 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Light Transmission | 86.0 | % | ASTM D-1003 |
| Refractive Index | 1.561 | — | ASTM D-542 |
