Silikal® R 62 resin
- CASE Ingredients Features
- Good LevelingSlip Resistance
- Chemical Family
- Methacrylates
SILIKAL® R 62 resin is a medium-viscosity methacrylic resin that is outstandingly suitable for self-leveling coatings of 1 – 4 mm, predominantly indoors or as a top coat for elastic floorings outdoors. Coatings with SILIKAL® R 62 resin can bridge cracks to a certain degree. Visually appealing surfaces and systems can be developed when used in conjunction with a variety of fillers, pigments or decorative materials.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Floor Coatings
- Infrastructure Roads & Paving
- Floor Coatings
- Coatings & Markings
Product Families
- Acrylics
Other characteristics
- Brand
- Silikal
- End Uses
- Top Coat
- Features
- Good Leveling, Slip Resistance
- Compatible Substrates & Surfaces
- Ceramic, Concrete
- Markets
- Building & Construction
- Paints & Coatings
- Application
SILIKAL® R 62 resin is used as a binder in manufacturing various coating types and recipes. Possible substrates for interiors include concrete, screed and ceramic tiles. A variety of different systems can be formulated from SILIKAL® R 62 resin depending on the application and stresses. Some standard recipes, which can be or may have to be adapted if alternative fillers are used, are suggested below. In this regard, we suggest that you conduct laboratory tests using your fillers or pigments.
- Coating Type
- Top Coat
- Technology
- CASE Ingredients
- Special Advice
Coatings made from SILIKAL® R 62 resin must not under any circumstances be rolled with a spiked roller, as otherwise the protective paraffin film cannot form.
- Hardener Dosages
* The quantity of hardening powder is always related to the quantity of resin
- HIGHLIGHTS
SILIKAL® R 62 resin is characterized by good flow properties and therefore tends not to form trowel marks, assuming that the suggested filler recipe is used. The slight plasticization ensures universal application. SILIKAL® R 62 resin is roughly comparable with SILIKAL® R 61 resin in terms of its physical characteristics. SILIKAL® R 62 resin is predominantly recommended for sprinkling colored flakes (loosely or saturated) and for smooth universal shades. The surface is preferably applied with SILIKAL® R 72 resin.
- Coating System
- Rollable wall coating
- Thin coating 1 – 2 mm for moderate stresses
- Topping 3 – 4 mm
- Colorless top coat
- Pigmented top coat
- Compatible Substrates and Surfaces
- Ceramic
- Concrete
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity (20°C) | 150 - 180 | mPa.s | DIN 53 015 |
| Flow Time (20°C, 4 mm Cup) | 40 - 50 | sec. | DIN 53 211 |
| Density (D₄²⁰) | 0.98 | g/cm³ | DIN 51 757 |
| Flash Point | 10.0 | °C | DIN 51 755 |
| Pot Life (20°C, 100 g, 3 % pbw. Hardening Powder) | approx. 15 min. | — | — |
| Application Temperature | 0 - 35 | °C | — |
| Compressive Strength (Self-Levelling 3 - 4 mm Flooring) | 45.0 | N/mm² | DIN 1164 |
| Tensile Strength in Bending (Self-Levelling 3 - 4 mm Flooring) | 25.0 | N/mm² | DIN 1164 |
| Specific Weight (Self-Levelling 3 - 4 mm Flooring) | 1.7 | g/cm³ | — |
| Pot Life (20°C, Self-Levelling 3 - 4 mm Flooring) | 12 - 15 | mins. | — |
