To catalogue
Silikal® R 82 resin
- CASE Ingredients Features
- High Capacity of PenetrationLow ViscosityWater ResistanceYellowing Resistance
- Chemical Family
- Methacrylates
SILIKAL® R 82 resin is a reactive, solvent-free, low-viscosity, virtually non-yellowing 2-component methacrylic resin offering good resistance to water interaction. It serves primarily as a slightly elasticized and colorless top coat on sprinkled coatings in wet areas. The low viscosity enhances the penetrative capacity of the resin in sand-coated surfaces. Hot water stress is limited to +60 °C. The temperature stress may be increased to +80 °C for short periods, e. g. to allow cleaning, provided that the coating is not thoroughly warmed through to the substrate.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
CASE Ingredients — Resins & Binders
- Acrylics
Other characteristics
- Brand
- Silikal
- End Uses
- Top Coat
- Features
High Capacity of Penetration, Low Viscosity, Water Resistance, Yellowing Resistance
- Usage
- Colorless top coat
- Pigmented top coat
- Markets
- Building & Construction
- Paints & Coatings
- Coating Type
- Top Coat
- Technology
- CASE Ingredients
- Labeling Claims
- Solvent-free
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity (20°C) | approx. 180 | mPa.s | DIN 53 015 |
| Flow Time (20°C, 4 mm Cup) | 30 - 40 | sec. | ISO 2431 |
| Density (D₄²⁰) | 0.98 | g/cm³ | DIN 51 757 |
| Flash Point | 10.0 | °C | DIN 51 755 |
| Pot Life (20°C, 100 g, 3 % pbw. Hardening Powder) | approx. 12 min. | — | — |
| Application Temperature | 5 - 30 | °C | — |
| Density (Hardened state) | 1.14 | g/cm³ | DIN 53 479 |
| Ultimate Elongation (Hardened state) | 2.7 | % | DIN 53 455 |
| Hardness (Hardened state) | 75.0 | Shore-D | DIN 53 505 |
| Water Absorption (4 Days, Hardened State, 50·50·4 mm) | 125.0 | mg | DIN 53 495 |
| Water Vapour Permeability (Hardened state) | 1.05*10⁻¹¹ | g/cm·h·Pa | DIN 53 122 |
