Silikal® R 61 resin
- CASE Ingredients Features
- Good LevelingSlip Resistance
- Chemical Family
- Methacrylates
SILIKAL® R 61 resin is a reactive, slightly elasticized resin for slip-resistant floorings in wet areas. SILIKAL® R 61 resin is a solvent-free, medium-viscosity 2-component methacrylic resin of a slightly elasticized character. It is employed as a binder in the manufacture of self-leveling coatings sprinkled with quartz sand or for smoothable floorings with colored quartz, predominantly in the food industry (wet areas), in coat thickness of 2 - 3 mm or 4 - 6 mm. Hot water stress is limited to 60 °C. This limit may be briefly exceeded to 80 °C for cleaning purposes, but only if the floor is not completely warmed through.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Floor Coatings
- Infrastructure Roads & Paving
- Floor Coatings
- Coatings & Markings
Product Families
- Acrylics
Other characteristics
- Brand
- Silikal
- Features
- Good Leveling, Slip Resistance
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- Paints & Coatings
- Application
Depending on the mechanical stresses, a distinction is made between a thin and a thick coating. For fork-lift truck traffic the minimum thickness of 4 mm must be observed. For temperatures below +5 °C and for outdoor use on concrete, more highly-elasticized resin types are preferred.
- Technology
- CASE Ingredients
- Labeling Claims
- Solvent-free
- Hardener Dosages
* The quantity of hardening powder is always related to the quantity of resin
- Coating System
Slip-resistant self-leveling thin coating 3 mm; Slip-resistant self-leveling thick coating 5 mm; Decorative colored quartz coating 4 – 6 mm (screed)
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity (20°C) | 260 - 320 | mPa.s | DIN 53 015 |
| Flow Time (20°C, 4 mm Cup) | 50 - 60 | sec. | DIN 53 211 |
| Density (D₄²⁰) | 0.99 | g/cm³ | DIN 51 757 |
| Flash Point | 10.0 | °C | DIN 51 755 |
| Pot Life (20°C, 100 g, 3 % pbw. Hardening Powder) | approx. 15 min. | — | — |
| Application Temperature | 0 - 35 | °C | — |
| Density (Hardened State) | 1.14 | g/cm³ | DIN 53 479 |
| Ultimate Elongation (Hardened State) | 34.0 | % | DIN 53 455 |
| Hardness (Hardened State) | 61 - 63 | Shore D | DIN 53 505 |
| Water Absorption (4 Days, Hardened State, 50·50·4 mm) | 90.0 | mg | DIN 53 495 |
| Water Vapour Permeability (Hardened State) | 1.05 x 10⁻¹¹ | g/cm·h·Pa | DIN 53 122 |
