Power Cutting Oil PC-10™
Power Cutting Oil PC-10™ is used in a wide range of cutting and drilling oil applications and is specifically designed for dual functionality: Use full-strength or as a supplemental coolant additive to the existing insoluble oil. PC-10™ contains Muscle Metal Treatment MT-10® technology, along with ionic bonding and lubricity enhancement agents. This results in reduced surface temperatures and extended tool life. It is designed for dual functionality, use as straight insoluble oil or a supplemental coolant additive for a wide range of cutting and drilling applications.
Properties
- Physical Form
- Liquid
Product families
Applications
- Equipment & Parts
Product Families
- Metalworking Fluids
Other characteristics
- Brand
- Power Cutting Oil PC-10
- Features
Anti-Wear Properties, Corrosion Resistant, Extreme Pressure Performance, Good Surface Finish, Heat Resistance, Service Life Extension
- Application Area
Broaching Applications, Drilling Applications, Machining Operations, Tapping Operations, Threading Operations; Broaching Applications; Drilling Applications; Machining Operations; Tapping Operations; Threading Operations
- Odor
- Mild petroleum
- Markets
- Industrial
- Appearance
- Light amber liquid
- Insoluble In
- Water
- Product Type
- Cutting Oils
- Fluid
- Metalworking Fluids
- Technology
- Ready-to-Use Products
- Packaging Type
- Bottles
- Drums
- Pails
- Use Direction
Use undiluted as a full-strength cutting oil; Add to the existing insoluble coolant in a 10-25% by volume ratio; Not recommended for use with water glycol compounds or triphenol butylated phosphate oils
- Typical Applications
Full-strength, undiluted cutting oil.; Supplemental additive to insoluble oils to boost coolant performance.; Use in machining operations such as: broaching, drilling and deep drilling, threading and tapping, cutting, milling, shaving, sharpening, planing and shaping, turning and grinding.
- Benefits and Features
Reduces friction-related heat and wear for extended tool life.; Increases cutting speeds and production rates.; Provides more metal extraction per cut.; Improves surface finishes.; Reduces tool head and metal surface temperatures.; Causes less drag on the metal, reducing power consumption.; Excellent extreme-pressure properties.; Provides process visibility.; Inhibits rust and corrosion.; Can be used in a wide range of cutting and drilling applications.; Reduces unnecessary downtime and scrap caused by premature tool failure.; Contains no solid lubricants, active sulfur, sulfonated ash or chlorinated solvents.; Contains ionic bonding, lubricity enhancement and extreme-pressure agents that are activated in the cutting zone for continuous lubrication to the work and tool.; Contains Muscle Metal Treatment MT-10® technology for increased lubricity and boundary film lubrication.
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Anti-Wear Properties
- Corrosion Resistant
- Extreme Pressure Performance
- Good Surface Finish
- Heat Resistance
- Service Life Extension
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (15°C) | 0.9946 | g/ml | D4052 |
| Flash Point | 162.0 | °C | D93 |
| Initial Boiling Point | 104.0 | °C | D1120 |
| Lbs per gal (U.S.) | 8.3 | — | — |
| Pour Point | -33.0 | °C | D97 |
| Rust Test (4hr) | Pass (no rust) | — | D665A |
| Specific Gravity (60°F) | 0.9956 | g/cm3 | D1298 |
| Timken Extreme Pressure OK Load | min. 60 | — | — |
| Viscosity (100°C) | 9.46 | cSt | D445 |
| Viscosity (40°C) | 114.33 | cSt | D445 |
| Viscosity index | 35.0 | — | D2270 |
