Polyseal™
- Chemical Family
- Acrylics & Acrylates
ChemMasters’ Polyseal is a 25% solids, high performance, co-polymer acrylic concrete curing and sealing compound. This state of the art proprietary formulation completely resists discoloration from ultraviolet light exposure creating a glossy membrane that remains clear throughout the service life.
Product families
- Floor Coatings
Other characteristics
- Brand
- Polyseal
- Features
Acid Resistant, Alkali Resistant, Detergent Resistant, Freeze/Thaw Stability, Good Non-Yellowing Properties, Grease Resistant, High Performance, Oil Resistant, Salt Resistance, UV Resistant
- Product Type
- Curing Compound, Sealer
- Curing Compound
- Sealer
- Application Method
- Roller, Spray
- Usage
To cure fresh exterior concrete where superior curing efficiency and non-yellowing performance are required; Seal, harden, and dustproof existing concrete, particularly architectural or residential concrete exposed to freeze thaw or UV light; Enhance color and provide uniform appearance of dry shake hardened floors and stamped concrete
- Cleanup
Clean tools immediately after use with ChemMasters Coating Repair or Xylene.
- Markets
- Building & Construction
- Storage
Store tightly sealed containers in cool, dry area away from direct sunlight and sources of heat. Shelf life is three years from date of manufacture. Store locked up.
- Advantages
Protects concrete from deicer, fertilizer, salt, grease, oil, alkalis, mild acid, and mild detergent; Minimizes spalling due to freeze thaw cycle exposure, hair line checking, premature cracking, dusting, and other common defects that result from improperly cured concrete; Seals out most construction dirt and stains. Prevents mortar, plaster, and concrete droppings from bonding to concrete surfaces; May be tinted with Polyseal Tints or Translucent Tints
- Limitations
For outdoor use only.; Not be used on surfaces to receive concrete overlays or toppings. Always test for compatibility and adhe-sion.; Do not use as a bond breaker for tilt wall construction or on surfaces requiring rubbing.; Do not apply to joints or channels scheduled to re-ceive elastomeric caulks.; Do not use if ambient or substrate temperature is be-low 40°F (4°C). For best results condition material to a minimum of 50°F (10°C) prior to application.; Do not apply in the presence of foodstuffs. USDA compliance pertains to fully cured coating.; Coating may be softened and lifted by gasoline or oth-er strong organic solvents such as xylene, toluene, or lacquer thinner. Solvent, gasoline, hydraulic fluids, peanut oil, and cooking oils must be cleaned quickly to prevent damage.; Safety Data Sheet and all label precautions must be fully understood before using product.; Protect adjoining glass, metal or painted surfaces that may be etched or damaged by over-spray or splash. Clean with xylene to remove dry material.; Quality curing or sealing compounds may darken or highlight the color variations naturally pre-sent in con-crete.
- Technology
- Ready-to-Use Products
