Polyseal™ WB
- Chemical Family
- Acrylics & Acrylates
Polyseal WB is a high performance, water-based, nonyellowing, acrylic concrete curing and sealing compound. This state-of-the-art proprietary formulation completely resists discoloration from ultraviolet light exposure, creates a glossy coating that remains clear throughout its life. Polyseal WB is a low Volatile Organic Compound (V.O.C.) water based product.
Product families
Applications
- Floor Coatings
Product Families
- Other Construction Chemicals
Other characteristics
- Brand
- Polyseal
- Features
Acid Resistant, Alkali Resistant, Cleanable, Detergent Resistant, Glossy Surface Aspects, Good Non-Yellowing Properties, Grease Resistant, High Performance, Low Odor, Low VOC, Oil Resistant, Salt Resistance, UV Resistant, Water-based
- Product Type
- Curing Compound, Sealer
- Curing Compound
- Sealer
- Application Area
- Floor Coverings
- Application Method
- Roller, Spray
- Usage
Interior concrete where a low odor curing compound that meets ASTM C1315 standards is desired.; Exterior concrete curing where a non-yellowing water-based, easy clean up, formulation is preferred.; Enhance color and provide a uniform appearance of dry shake hardened floors, integral colored concrete, and acid stained concrete while curing and sealing the surface.; Seal and dustproof older interior or exterior concrete.
- Cleanup
Before material dries and hardens, clean tools and equip-ment with warm water and detergent.
- Markets
- Building & Construction
- Storage
Do not allow to freeze. Store tightly sealed containers in cool, dry area. Shelf life is one year from date of manufacture.
- Advantages
Polyseal WB is very low VOC emission product at <100 g/L VOC.; Protects concrete surfaces against deicing chemicals, fertilizers, salts, grease, oil, alkalis, mild acids, and detergents.; Minimizes spalling due to freeze-thaw cycle exposure, hair line checking, premature cracking, dusting and other common defects that result from improperly cured concrete.; May be applied over existing water and solvent based sealers (conduct a small test patch to ensure compatibility).; Seals out most construction dirt and stains. Prevents mortar, plaster, and concrete droppings from bonding to concrete surfaces.; Tint pack system available in twelve standard colors; special color matching available subject to minimum quantities.; Tinted Polyseal WB may be used to cure or seal rough finished colored concrete and aids in reducing the finishing imperfections or variations in color.
- Limitations
Polyseal WB should not be used on surfaces to re-ceive concrete overlays or toppings. Consult Chem-Masters for compatibility of other surface treatments. Always test for compatibility, penetration and adhesion.; Do not use as a bond breaker for tilt wall construction or on surfaces requiring rubbing.; Do not apply Polyseal WB to joints or channels sched-uled to receive elastomeric caulks.; Polyseal WB Tint is made for use with water based formulations only. Do not use to tint solvent based ver-sions of Polyseal.; Tinted Polyseal WB is not a permanent remedy for poorly colored or finished flooring. Polyseal WB is a film forming sealer that will wear over time. Colored Polyseal WB is not intended as a stand-alone coating to color a concrete floor. If a more wear resistant color coating is required, consult ChemMasters Technical Service Staff.; Color uniformity of Tinted Polyseal WB will depend up-on concrete finish and absorptivity. A small test appli-cation is recommended to ensure acceptable single coat appearance. A second coat is not recommended.; Do not use if ambient or surface temperature is below 50°F (10°C). For best results, condition material to at least 60°F (16°C) prior to application.; Use when the temperature is 5oF (2.8oC) above the dew point.; Clear curing and sealing compounds may darken or highlight the subtle color variations naturally present in concrete. When the difference in shading caused by absorptive deviation or finishing techniques is objec-tionable, consult ChemMasters Technical Staff prior to concrete placement for recommendations.
- Technology
- Ready-to-Use Products
