Certi-Vex® AC1315 HG
- Chemical Family
- Acrylics & Acrylates
CERTI-VEX AC1315 HG is a 30% solids, styrene acrylic, solvent-based, non-yellowing curing, sealing, hardening, dust proofing and water repellent compound that is tough, chemical resistant, and long lasting. The product is design to protect and enhance exterior new and existing concrete, stamped, decorative and exposed aggregate concrete and architectural horizontal and vertical sections where a clear, high gloss and shine is required. Certi-Vex AC 1315 HG also provides protection from the damaging effects of water penetration and staining. Certi-Vex AC1315 HG features breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.
Product families
- Floor Coatings
Other characteristics
- Brand
- Certi-Vex
- Features
Alkali Resistant, Chemical Resistant, Excellent Water Repellency , Freeze/Thaw Stability, Good Non-Yellowing Properties, Good Toughness, High Gloss, Long Term Protection, Salt Resistance, UV Resistant
- Product Type
- Curing Compound, Sealer
- Curing Compound
- Sealer
- Application Method
- Roller, Spray
- Usage
To cure fresh exterior concrete where superior curing efficiency and non-yellowing performance are required; Seal, harden, and dustproof existing concrete, particularly architectural or residential concrete exposed to freeze thaw or UV light; Enhance color and provide uniform appearance of dry shake hardened floors and stamped concrete
- Cleanup
Clean tools immediately after use with Polyseal Solvent or xylene.
- Markets
- Building & Construction
- Storage
Store tightly sealed containers in a cool dry area away from direct sunlight and sources of heat or ignition. Shelf life is three years from date of manufacture.
- Advantages
Allows freshly placed concrete to achieve maximum design strength and durability; High solids, high gloss formula; May be applied to damp surfaces without whitening or loss of adhesion; Coated surfaces are easier to clean and maintain; Excellent protection against staining or damage caused by exposure to alkalis, salts, cleaners and common industrial chemicals; Reduces efflorescence, dusting and spalling; Recoatable
- Limitations
For outdoor use only.; Do not apply to joints or channels scheduled to receive elastomeric caulks.; Do not use on surfaces to receive concrete overlays or toppings. Always test for compatibility and adhesion.; Do not use as a bond breaker for tilt wall construction or on surfaces requiring rubbing.; Do not apply to floors subjected to spills of gasoline or other strong organic solvents such as xylene, toluene, or lacquer thinner. Solvent, gasoline, hydraulic fluids, peanut oil, and cooking oils must be cleaned quickly to prevent softening of the membrane.; Do not apply in the presence of foodstuffs. USDA ap-proval pertains to fully cured material.; Over application or applying in high temperatures may result in the formation of bubbles.; Do not use if ambient or substrate temperature is be-low 40°F (4°C). For best results condition material to a minimum of 50°F (10°C) prior to application; Quality curing or sealing compounds and floor treat-ments may darken or highlight the subtle color varia-tions naturally present in concrete. When the differ-ence in shading is objectionable consult ChemMasters Technical Department prior to concrete placement
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
