Durapatch™ EPX
DuraPatch EPX is a specially formulated, three-component, l00% solids epoxy patching system for resurfacing and repair of concrete substrates. DuraPatch EPX contains a quartz aggregate blend for heavy duty, industrial floors.
Product families
- Mortar & Grouts
Other characteristics
- Brand
- Durapatch
- Features
Abrasion Resistant, Chemical Resistant, Fast Curing, Fast Setting, Good Bonding Strength, Good Shrinkage Resistance, High Tensile Strength
- Product Type
- Mortar
- Application Area
- Masonry
- Application Method
- Trowel
- Usage
Patching interior or exterior, horizontal concrete; Resurfacing of heavy duty industrial and commercial facility floors; Repair of deteriorated joints; Rapid repairs of loading docks and high traffic aisles; Areas where high abrasion resistance is required; Thin or thick repairs under forklift, pallet jack or other hard wheeled traffic
- Cleanup
Before the mixed material sets, clean tools and equipment with xylene or xylol.
- Markets
- Building & Construction
- Storage
Store tightly sealed containers in cool, dry place away from direct sunlight and heat sources. Shelf life of un-opened containers is one year from date of manufacture.
- Advantages
Very high early strengths and rapid curing cycle for minimal downtime; Excellent bond strength at depths from 3/16 inch to full depth; 100% solids, VOC compliant system, USDA approved; Excellent chemical resistance; Superior shear bond and tensile strengths; No shrinkage
- Limitations
Do not thin DuraPatch EPX. Adding solvents will pre-vent proper cure.; DuraPatch EPX is not intended for use when con-crete surface temperatures are below 50°F (10°C).; Condition DuraPatch EPX units for 24 hours before placement at 60°to 70°F (15° to 21°C).
- Technology
- Ready-to-Use Products
- Application Methods
- Trowel
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compressive Strength (1 day) | 7500 (51.71) | psi (MPa) | ASTM D695 |
| Compressive Strength (7 days) | 12000 (82.74) | psi (MPa) | ASTM D695 |
| Flexural Strength (7 days) | 3500 (82.74) | psi (MPa) | ASTM C348 |
| Pot Life [70°C (21°C)] | 20.0 | minutes | — |
| Shear Bond Strength (7 days) | 2500 (82.74) | psi (MPa) | ASTM C882 |
| Tensile Strength (7 days) | 1450 (9.99) | psi (MPa) | ASTM C307 |
