TR Industries TR-108 BASIC MOLD RELEASE

Product families

Other characteristics

End Uses

Tooling

Functions

Mold Release Agent, Release Agent

Labeling Claims

Silicone-free

Processing Methods

Compression Molding, Hand Lay-Up, Resin Transfer Molding, Spray Lay-Up

Compatible Polymers & Resins

Epoxies (EP), Polyesters

Usage

As a release agent for composite molding on all FRP tooling, metal and other hard surface molds.; Open mold hand or spray lay up; Resin Transfer/injection (RTM) & (RIM); Vacuum bag and compression molding; Polyester & epoxy resins

Markets

Industrial

PACKAGING

Available in 14oz (397g) cans and packaged in case quantity of 12.

Application

On new or reconditioned tooling, suggest use of our sealer glaze TR-301 prior to waxing for added release, gloss and mold life. Apply TR-108 with sponge applicator in thin even circular motion to the mold or pattern surface working in small 3' x 3' overlapping sections. Polish wipe applied wax while still slightly soft or wet to a gloss finish with a soft cloth (do not use microfiber) frequently rotating cloth (do not allow wax to set). For new or reconditioned molds apply a minimum of 6 coats of paste wax, waiting approx. 30-60 minutes between applications for the wax to harden after the polish wipe. Best results are obtained, if after application, mold is allowed to stand overnight and a subsequent final coat of wax release applied following day prior to gel coating. Follow with a coat of wax for the first 2-3 parts released. Then determine how many parts can be effectively produced before re-waxing is required. This will vary depending on molding condition, configuration, resin, mold cycles, effective cure of production gel coat, etc.. NOTE: Do not allow wax to completely dry before wiping. Check suitability when molding above 190°F (88°C)

Show in full

Technology

Plastics

Packaging Type

Cans

Product Features

High carnauba wax content producing hard high gloss film – excellent for breaking in new molds; Non-silicone - good tape adhesion for use where masking is required; Effective in preventing/reducing pre-release on large tools, plugs & heavy laminates; Excellent at eliminating troublesome gel coat fisheyes

Material Features

• Excellent Mold Release
• Excellent Seal Properties
• High Gloss

Storage Precaution

Flammable solid, store in a cool dry place and keep in original unopened container. Keep away from spark, open flame or other sources of ignition.

Compatible Polymers and Resins

• Epoxies (EP)
• Polyesters

Plastics and Elastomers End Uses

Tooling

Plastics and Elastomers Functions

• Mold Release Agent
• Release Agent

Plastics and Elastomers Processing Methods

• Compression Molding
• Hand Lay-Up
• Resin Transfer Molding
• Spray Lay-Up