TR Industries TR-111 SLURRY WAX RELEASE

Product families

Other characteristics

End Uses

Edge Banding, Flanges, Synthetic Marble, Tooling

Functions

Mold Release Agent, Release Agent

Usage

For all mold flanges, edges and hats in cultured marble, onyx or granite production, tubs, showers, spa fabrication, polymer concrete and general polyester molding applications. Any surface where gloss or cosmetics is not a critical requirement for finished part. Sealer on porous substrates (wood, plaster, etc.) for prototypes and mock-ups or in conjunction with PVA sprayed film.

Show in full

Markets

• Building & Construction
• Consumer Goods
• Industrial

PACKAGING

Available in gallon 4x1/cases, 5 gallon and 55 gallon drum.

Application

Apply a minimum of two coats with brush or cloth allowing each coat to dry prior to applying additional coats. This provides a base film for initial release. Apply again lightly after first part is pulled and then subsequent coats as needed. Applications will vary dependent on surface conditions, molding cycle, fabrication methods and general shop practices.

Show in full

Technology

Plastics

Packaging Type

Drums

Product Features

Easy spreading and wipe characteristics; Provides positive releases, remains soft and ease of removal; Effectively fills rough surfaces and is PVA compatible; Good thermal stability with reduced build up

Material Features

• Cost Effective
• Ease of Handling
• Excellent Mold Release
• Good Smoothness
• Soft

Storage Precaution

Flammable liquid, store in a cool dry place and keep in original unopened container. Keep away from spark, open flame or other sources of ignition. Use in well ventilated area.

Plastics and Elastomers End Uses

• Edge Banding
• Flanges
• Synthetic Marble
• Tooling

Plastics and Elastomers Functions

• Mold Release Agent
• Release Agent