TR Industries TR-214 REGULAR LIQUID WAX RELEASE

Other characteristics

End Uses

Pipes, Tooling

Processing Methods

Hand Lay-Up, Spray Lay-Up

Compatible Polymers & Resins

Epoxies (EP), Polyesters, Polyurethanes (PU)

Usage

TR-214 is a liquid release agent for use on polyester, epoxy, metal, wood & other hard surface molds; Open mold hand or spray lay up; Corrosion, tanks & piping; Polyester, epoxy & urethane resins

Markets

Industrial

PACKAGING

Available in gallon and 55 gallon drums.

Application

Apply by either wipe or spray method. For wiping, saturate a soft cotton cloth and apply an even uniform coat. Allow the wax release to dry to a haze (approx. 5-10min) and then polish with soft toweling. When spraying use 35-50psi air pressure to produce a fine mist and deposit a uniform slightly wet film avoiding excess flooding. Wipe with soft cotton cloth when wax film dries to haze.. NOTE: Soft settling occurs with most liquid wax releases requiring agitation before and during use of this product. For use only on molds first conditioned with paste wax or semi-permanent release.

Show in full

Technology

Plastics

Packaging Type

Drums

Product Features

Fast and easy application with quick drying that improves and speeds production cycles; Reduces excessive styrene/wax accumulation that maintains or aids gloss retention; Polishes to a high gloss without streaking; Ideal on textured surfaces; Improved slip properties

Material Features

• Easier Processing
• Fast Production Cycle
• High Efficiency

Storage Precaution

Release contains flammable solvents. Store in a cool dry place and keep in original unopened container away from heat, open flame and sparks. This product should be used in well ventilated area. Use proper safety precautions when spraying.

Compatible Polymers and Resins

• Epoxies (EP)
• Polyesters
• Polyurethanes (PU)

Plastics and Elastomers End Uses

• Pipes
• Tooling

Plastics and Elastomers Processing Methods

• Hand Lay-Up
• Spray Lay-Up