TR Industries TR-216 HI-TEMP LIQUID WAX RELEASE
TR Industries TR-216 Hi-temp Liquid Wax Release is a high temperature liquid mold release wax formulated for increased production efficiency on well conditioned FRP tooling and other hard surface molds.
Properties
- Physical Form
- Liquid
Product families
Applications
- Other Industrial Applications
- Tooling & Moldmaking
Product Families
- Performance Additives
Other characteristics
- End Uses
- Tooling
- Functions
- Mold Release Agent, Release Agent
- Processing Methods
Compression Molding, Hand Lay-Up, Resin Transfer Molding, Spray Lay-Up
- Compatible Polymers & Resins
- Epoxies (EP), Polyesters
- Usage
a liquid wax release for use on all FRP tooling, metal, and other hard surface molds.; Open mold hand or spray lay up; Resin transfer/injection (RTM) & (RIM); Vacuum bag and compression molding; Polyester, epoxy & urethane resins
- Markets
- Industrial
- PACKAGING
- Available in gallon, 5gal and 55 gallon drums.
- Application
Apply by either wipe or spray method. For wiping, saturate a soft cotton cloth and apply an even uniform coat. Allow the wax release to dry to a haze (approx. 5-10min) and then polish with soft toweling. When spraying use 35-50psi air pressure to produce a fine mist and deposit a uniform slightly wet film avoiding excess flooding. Wipe with soft cotton cloth when wax film dries to haze.. NOTE: : Some soft settling may occur over time. Recommend shaking, agitating or mixing before use if allowed to stand for extended period of time ensuring adequate wax film thickness on mold.
- Technology
- Plastics
- Packaging Type
- Drums
- Product Features
Blend of natural and synthetic waxes with durable hi-temp hard wax properties; Reduces excessive styrene/wax accumulation – excellent for textured molds; Provides high gloss finish and excellent slip for easy de-molding; Fast dry & easy buffing without streaking; Uniform solution with minimal wax settling or separation
- Material Features
- Cost Effective
- Durable
- Ease of Handling
- Excellent Mold Release
- High Gloss
- High Temperature Strength
- Storage Precaution
Flammable liquid, store in a cool dry place and keep in original unopened container. Keep away from spark, open flame or other sources of ignition. Use in well ventilated area.
- Compatible Polymers and Resins
- Epoxies (EP)
- Polyesters
- Plastics and Elastomers End Uses
- Tooling
- Plastics and Elastomers Functions
- Mold Release Agent
- Release Agent
- Plastics and Elastomers Processing Methods
- Compression Molding
- Hand Lay-Up
- Resin Transfer Molding
- Spray Lay-Up
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry Time | approx. 3-5 | minutes |
| Specific Gravity | 87 | — |
| Thermal Stability (93°C - 99°C) | 200 - 210 | °F |
| VOC Content | 6.52 (781) | lbs./gal (g/l) |
