ALFATER® XL A80 2EC0000
MOCOM Compounds ALFATER® XL A80 2EC0000 is a black, electrically conductive, thermoplastic vulcanisate (PP+EPDM) with reduced surface resistivity, good weathering resistance, good chemical resistance, good ozone resistance, and good hot air and hydrolysis resistance. It is used in the automotive, machinery, electrical and electronic, and building and construction sectors for applications such as injection molded parts, extruded parts, coextrusion, and functional components with electrical conductivity, seals, sealing lips, and profiles.
Product families
Applications
- Sensors & Actuators
Product Families
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- ALFATER® XL
- Density
- 1000.0 - 1000.0 kg/m³
- End Uses
Automotive Applications, Construction Applications, Electrical/Electronic Applications, Machine/Mechanical Parts, Profiles, Sealing Lip, Seals
- Features
Chemical Resistant, Electrically Conductive, Excellent Hydrolysis Resistance, Flexible, Good Weather Stability, Hot Air Resistant, Ozone Resistant, Reduced Surface Resistivity, Soft
- Polymer Name
- PP/EPDM
- Tear Strength
- 40.0 - 40.0 kN/m
- Processing Methods
- Coextrusion, Extrusion, Injection Molding
- Color
- Black
- Markets
- Electrical & Electronics
- Technology
- Elastomers
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Fillers Included
- Mineral
- Material Features
- Chemical Resistant
- Electrically Conductive
- Excellent Hydrolysis Resistance
- Flexible
- Good Weather Stability
- Hot Air Resistant
- Ozone Resistant
- Reduced Surface Resistivity
- Storage Condition
Store in dry, tighlty sealed protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Polypropylene Copolymer
- Polypropylenes (PP)
- Thermoplastic Elastomers (TPE)
- Thermoplastic Polyolefins (TPO)
- Thermoplastic Vulcanizates (TPV)
- Plastics and Elastomers End Uses
- Automotive Applications
- Construction Applications
- Electrical/Electronic Applications
- Machine/Mechanical Parts
- Profiles
- Sealing Lip
- Seals
- Plastics and Elastomers Processing Methods
- Coextrusion
- Extrusion
- Injection Molding
Technical data
Table 1 of 8
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Type 2) | 8.4 | MPa | ISO 37 |
| Tear Strength (Method Ba) | 40.0 | kN/m | ISO 34-1 |
| Elongation at Break (Type 2) | 470.0 | % | ISO 37 |
| Shore Hardness A (15s) | 80.0 | — | ISO 868 |
| Tensile Stress at 100% Elongation (Type 2) | 4.2 | MPa | ISO 37 |
Table 2 of 8
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1000.0 | kg/m³ | ISO 1183 |
Table 3 of 8
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (22h, at 70°C, 25%, Type A) | 53.0 | % | ISO 815 |
| Compression Set (22h, at 100°C, 25%, Type A) | 60.0 | % | ISO 815 |
| Compression Set (72h, at 22°C, 25%, Type A) | 30.0 | % | ISO 815 |
| Compression Set (72h, at 125°C, 25%, Type A) | 70.0 | % | ISO 815 |
Table 4 of 8
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C |
| Moisture Content | max. 0.1 | % |
Table 5 of 8
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistance | 25.0 | Ohm | DIN EN 62631-3-2 |
Table 6 of 8
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flammability (1.5 mm) | HB | class | UL 94 |
| Glow Wire (GWFI, 750°C, 2mm) | Passed | — | DIN EN 60695 |
Table 7 of 8
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Die Temperature | 200 - 230 | °C |
| Melt Temperature | 200 - 240 | °C |
Table 8 of 8
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure (hydraulic) | min. 5 | bar |
| Mould Temperature | 10 - 60 | °C |
| Melt Temperature | 195 - 230 | °C |
| Holding Pressure (of injection pressure) | 50 - 70 | % |
| Injection Speed | High | — |
