ALFATER® XL A80I 2FE0002
- CAS Number
- 5036-48-6
MOCOM Compounds ALFATER® XL A80I 2FE0002 is a thermoplastic vulcanisate (PP+EPDM), black in color, with a high density and noise dampening properties. It is suitable for injection molding, with a melt temperature of 195-230°C and mold temperature of 10-70°C. It has good weathering resistance, is resistant to alkalis, has good ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for applications in the automotive, machinery, building and construction, and electrical and electronic sectors, and has a service temperature range of -40-125°C. For optimal performance, it should be stored dry, protected from light, and tightly sealed, preferably at temperatures not exceeding 30°C.
Product families
Applications
- Sensors & Actuators
Product Families
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- ALFATER® XL
- Density
- 2100.0 - 2100.0 kg/m³
- Polymer Name
- PP/EPDM
- Tear Strength
- 17.0 - 17.0 kN/m
- Processing Methods
- Injection Molding
- Color
- Black
- Markets
- Electrical & Electronics
- Technology
- Elastomers
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Fillers Included
- Iron
- Metal
- Mineral
- Material Features
- Alkali Resistant
- Excellent Hydrolysis Resistance
- Flexible
- Good Weather Stability
- High Density
- Hot Air Resistant
- Noise Damping
- Ozone Resistant
- Storage Condition
Store in dry, tighlty sealed protected from light not above 30°C.
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Construction Applications
- Electrical/Electronic Applications
- Machine/Mechanical Parts
- Seals
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Type 2) | 2.5 | MPa | ISO 37 |
| Tear Strength (Method Ba) | 17.0 | kN/m | ISO 34-1 |
| Elongation at Break (Type 2) | 225.0 | % | ISO 37 |
| Shore Hardness A (15s) | 80.0 | — | ISO 868 |
| Tensile Stress at 100% Elongation (Type 2) | 2.2 | MPa | ISO 37 |
Table 2 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 2100.0 | kg/m³ | ISO 1183 |
Table 3 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (22h, at 70°C, 25%, Type A) | 50.0 | % | ISO 815 |
| Compression Set (22h, at 100°C, 25%, Type A) | 65.0 | % | ISO 815 |
| Compression Set (72h, at 22°C, 25%, Type A) | 55.0 | % | ISO 815 |
| Compression Set (72h, at 125°C, 25%, Type A) | 75.0 | % | ISO 815 |
Table 4 of 7
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C |
| Moisture Content | max. 0.1 | % |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flammability (1.5 mm) | HB | class | UL 94 |
| Flammability (3.0 mm) | HB | class | UL 94 |
| Glow Wire (GWFI, 650°C, 2mm) | Passed | — | DIN EN 60695 |
Table 6 of 7
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Mould Temperature | 10 - 70 | °C |
| Melt Temperature | 195 - 230 | °C |
| Injection Speed | High | — |
Table 7 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 0.7 - 1.1 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.5 - 0.9 | % | ISO 294-4 |
| Spiral Flow (2 mm wall thickness) | 75.0 | cm | — |
