ALFATER® XL A60E 2GP0000

Name: ALFATER® XL A60E 2GP0000
Brand: ALFATER® XL

MOCOM Compounds ALFATER® XL A60E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with high viscosity, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, such as for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. It also has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. All of these properties make it a versatile material for various applications.

Product families

Applications

Consumer Goods — Furniture

Automotive & Transportation — Automotive

Chassis & Brake
Cooling & Climate
Powertrain & UTH

Electrical & Electronics — Parts & Components

Sensors & Actuators

Electrical & Electronics — Wire & Cable

Jacketing & Insulation

Product Families

Elastomers — Thermoplastic Elastomers

Thermoplastic Vulcanizates (TPV)

Other characteristics

Brand: ALFATER® XL
Density: 940.0 - 940.0 kg/m³
Polymer Name: PP/EPDM
Tear Strength: 22.0 - 22.0 kN/m
Labeling Claims: Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
Processing Methods: Blow Molding, Coextrusion, Extrusion, Injection Blow Molding, Injection Molding
Color: Black
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Technology: Elastomers
Material Features: Chemical Resistant
Excellent Hydrolysis Resistance
Flexible
Good Weather Stability
High Viscosity
Hot Air Resistant
Hydrolysis Resistant
Ozone Resistant
Storage Condition: Store in dry, tighlty sealed protected from light not above 30°C.
Pre-Drying Conditions: In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Compatible Polymers and Resins: Polyethylenes (PE)
Polypropylene Copolymer
Polypropylenes (PP)
Thermoplastic Elastomers (TPE)
Thermoplastic Polyolefins (TPO)
Thermoplastic Vulcanizates (TPV)
Plastics and Elastomers End Uses: Air Ducts
Automotive Applications
Bellows
Cable Guides
Cable Jacketing
Conduit
Construction Applications
Electrical/Electronic Applications
Plastics and Elastomers Processing Methods: Blow Molding
Coextrusion
Extrusion
Injection Blow Molding
Injection Molding

Technical data

Table 1 of 7

5 rows

Characteristic	Value	Unit	Method
Tensile Strength (Type 2)	5.4	MPa	ISO 37
Tear Strength (Method Ba)	22.0	kN/m	ISO 34-1
Elongation at Break (Type 2)	350.0	%	ISO 37
Shore Hardness A (15s)	60.0	—	ISO 868
Tensile Stress at 100% Elongation (Type 2)	2.5	MPa	ISO 37

Table 2 of 7

1 row

Characteristic	Value	Unit	Method
Density	940.0	kg/m³	ISO 1183

Table 3 of 7

4 rows

Characteristic	Value	Unit	Method
Compression Set (22h, at 70°C, 25%, Type A)	38.0	%	ISO 815
Compression Set (22h, at 100°C, 25%, Type A)	37.0	%	ISO 815
Compression Set (72h, at 22°C, 25%, Type A)	22.0	%	ISO 815
Compression Set (72h, at 125°C, 25%, Type A)	55.0	%	ISO 815

Table 4 of 7

2 rows

Characteristic	Value	Unit
Service Temperature (depending on load, geometry, etc.)	- 40 to 125	°C
Moisture Content	max. 0.1	%

Table 5 of 7