ALFATER® XL A55I 4PA0010
- CAS Number
- 6283-86-9
MOCOM Compounds ALFATER® XL A55I 4PA0010 is a thermoplastic vulcanisate (PP+EPDM) available in natural, bright inherent, and black color options. It features adhesion-modified to polyamide, easy flow, good weathering resistance, good chemical resistance, good ozone resistance, and good hot air resistance. It can be used in Automotive, building and construction, electrical and electronic, machinery, and furniture applications such as seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, functional components, casters, and 2K components.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Furniture
- Chassis & Brake
- Consumer Electronics
- Sensors & Actuators
Product Families
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- ALFATER® XL
- Density
- 930.0 - 930.0 kg/m³
- Polymer Name
- PP/EPDM
- Tear Strength
- 15.0 - 15.0 kN/m
- Labeling Claims
Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
- Processing Methods
- Injection Molding
- Color
- Black
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Fillers Included
- Mineral
- Material Features
- Chemical Resistant
- Excellent Hydrolysis Resistance
- Flexible
- Good Flow
- Good Weather Stability
- Hot Air Resistant
- Hydrolysis Resistant
- Ozone Resistant
- Storage Condition
Store in dry, tighlty sealed protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Compatible Polymers and Resins
- Polyamide 6 (PA 6)
- Polyamide 66 (PA 66)
- Polyamides
- Plastics and Elastomers End Uses
- Automotive Applications
- Casters
- Construction Applications
- Electrical/Electronic Applications
- Furniture
- Handles
- Machine/Mechanical Parts
- Sealing Lip
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Type 2) | 3.7 | MPa | ISO 37 |
| Tear Strength (Method Ba) | 15.0 | kN/m | ISO 34-1 |
| Elongation at Break (Type 2) | 250.0 | % | ISO 37 |
| Shore Hardness A (15s) | 55.0 | — | ISO 868 |
| Tensile Stress at 100% Elongation (Type 2) | 2.4 | MPa | ISO 37 |
Table 2 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 930.0 | kg/m³ | ISO 1183 |
Table 3 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (22h, at 70°C, 25%, Type A) | 30.0 | % | ISO 815 |
| Compression Set (22h, at 100°C, 25%, Type A) | 37.0 | % | ISO 815 |
| Compression Set (72h, at 22°C, 25%, Type A) | 18.0 | % | ISO 815 |
| Compression Set (72h, at 125°C, 25%, Type A) | 52.0 | % | ISO 815 |
Table 4 of 7
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C |
| Moisture Content | max. 0.1 | % |
Table 5 of 7
2 rows| Characteristic | Value | Method |
|---|---|---|
| Glow Wire (GWFI, 750°C, 2mm) | Passed | DIN EN 60695 |
| Fire Behavior FMVSS (2.0 mm) | Passed | FMVSS 302/DIN 75200 |
Table 6 of 7
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Mould Temperature | <70 | °C |
| Back Pressure (hydraulic) | min. 3 | bar |
| Melt Temperature | 215 - 260 | °C |
| Holding Pressure (of injection pressure) | 50 - 70 | % |
| Injection Speed | High | — |
Table 7 of 7
1 row| Characteristic | Value | Unit |
|---|---|---|
| Spiral Flow (2 mm wall thickness) | 55.0 | cm |
