ALTECH® ECO PC 1000/128 UV
- Chemical Family
- Polycarbonate (PC)
MOCOM Compounds ALTECH® ECO PC 1000/128 UV is a UV-stabilized polycarbonate that has been pre-dried under 120°C in a dry air (dessiccant) dryer for 2-3 hours and in an air circulating dryer between 100-120°C for 4-12 hours, depending on the moisture content, with a maximum moisture content of less than 0.02%. It is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It is suitable for exterior parts, light transparent components, injection molded parts, and various other lighting, electrical, and electronic applications such as lamp covers, housings, and more.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Electronics
- Lighting
- Housings & Enclosures
Product Families
- Polycarbonates
Other characteristics
- Brand
- ALTECH® ECO
- Functions
- Resin
- Polymer Name
- Polycarbonate (PC)
- Labeling Claims
Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
- Additives Included
- UV Stabilizer
- Processing Methods
- Injection Molding
- Certifications & Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS), EC No.1907/2006, IATF 16949, ISO 13485, ISO 14001, ISO 17025, ISO 45001, ISO 50001, ISO 9001, REACH (Europe), REACH (UK), RoHS Compliant, SVHC Compliant
- Markets
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Material Features
- Good Mold Release
- UV Resistant
- UV Stabilized
- Storage Condition
- Store in dry, protected from light.
- Pre-Drying Conditions
In an air circulatIng dryer 100-120 °C for 4-12 h; Dependant on moisture content; 120 °C in a dry air (dessiccant) dryer for 2-3 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Electrical/Electronic Applications
- Housings
- Lamp Covers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 2200.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 64.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 6.0 | % | ISO 527 |
| Tensile Elongation at Break | 80.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 9.5 | kJ/m² | ISO 179/1eA |
| Ball Indentation Temperature | 140.0 | °C | DIN EN 60695-10-2 |
Table 2 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1200.0 | kg/m³ | ISO 1183 |
| Global Warming Potential (GWP) | 0.69 | kg CO₂ eq. | ISO 14040, 14044 |
Table 3 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat B50 | 142.0 | °C | ISO 306 |
Table 4 of 7
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.02 | % |
Table 5 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flammability (1.5 mm) | V - 2 | class | UL 94 |
| Glow Wire (GWFI, 850°C, 2mm) | Passed | — | DIN EN 60695 |
Table 6 of 7
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 270 - 310 | °C |
| Mould Temperature | 80 - 110 | °C |
Table 7 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index (MVR) | 16.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 300.0 | °C | — |
| MVR Load | 1.2 | kg | — |
| Shrinkage (24h) | 0.6 - 0.9 | % | ISO 294-4 |
