CRACKBOND® EPOTHANE T3

Product families

Other characteristics

Brand

CRACKBOND

Features

Fast Cure, Low Modulus, Moisture Resistant, Skid Resistant

Product Type

• Epoxy Coating, Sealer
• Epoxy Coating
• Sealer

Compatible Substrates & Surfaces

Concrete

Markets

Building & Construction

Clean Up

Always wear appropriate personal protective equipment such as safety glasses and gloves. Clean uncured materials from tools and equipment using a mild solvent, such as CRACKBOND® INDUSTRIAL CITRUS CLEANER from Adhesives Technology Corp. Cured material may only be removed mechanically using a sander or grinder. Collect with absorbent material. Flush area with water. Dispose of in accordance with local, state and federal disposal regulations.

Show in full

Availability

Adhesives Technology Corp. (ATC) products are available online and through select distributors providing all your construction needs.

Technology

Ready-to-Use Products

Cure Schedule

Temperature °F (°C)

Specification

The overlay shall be a 1:1 mix ratio epoxy urethane system supplied in premeasured containers. At 7 days and temperature of 75°F (24°C), the overlay shall have a compressive yield strength of 4,772 psi (32.9 MPa) per ASTM D695. The overlay shall be CRACKBOND EPOTHANE T3 from Adhesives Technology Corp., Pompano Beach, Florida.

Show in full

Labeling Claims

Non-Flammable

Shelf Life Storage

For best results, store between 50°F (10°C) and 95°F (35°C). Shelf life is 24 months when stored in unopened containers in dry conditions.

Advantages and Features

Lo-mod, fast cure epoxy/urethane hybrid; Excellent bond strength; Moisture-insensitive; 45 - 60% elongation; Retains tensile elongation at low temperatures; Nonflammable; Easy to mix - 1:1 ratio, color coded; No primer required; Designed for automated pump or hand mix application; Made in the USA in accordance with CFR 49 section 50101

Show in full

Standards and Approvals

• AASHTO M235 / ASTM C881-15
• Type III Grade 2 Class C

Limitations and Warnings

For professional use only; Do not thin with solvents, as this may affect cure; Concrete should be a minimum of 28 days old prior to overlay; Do not apply if rain is expected; Consult with ATC when used on exterior slabs on grade subject to freezing or for project specific directions when using as a binder for epoxy mortar; EPOTHANE T3 is a vapor barrier after curing; Consult with ATC when mixing or placing outside of the recommended temperature range

Show in full

Installation and Coverage

In order to achieve maximum results, proper installation is imperative. Coverage will vary according to the porosity of the concrete. First course of 1 gallon neat epoxy, with a minimum of 3/8 in. overlay, will cover 40 ft2 and second course will cover will cover 20 ft2 .

General Uses and Applications

Preservation overlay for bridge and parking decks; High friction surface treatments; Epoxy mortar binder for patching concrete

Ready to Use Product Features

• Fast Cure
• Low Modulus
• Moisture Resistant
• Skid Resistant

Compatible Substrates and Surfaces

Concrete