MOXIE SHIELD 1300 Brick Sealer
Moxie Shield 1300 is a water repellent, surface sealer formulated for all types of natural brick surfaces. Prevents water and moisture penetration on vertical, above-grade and natural brick surfaces providing long-term protection. Suitable for interior, exterior, decorative, and historical applications.
Product families
- Primers & Sealers
Other characteristics
- Brand
- MOXIE SHIELD
- Features
Alkali Resistant, Breathable, Easy To Apply, Efflorescence Control, Excellent Water Repellency , Freeze/Thaw Stability, Fungus Resistant, Good Weather Stability, Long Term Protection, Low Moisture Vapor Transmission, Low Water Permeability, Mildew Resistant, Non-Toxic, Service Life Extension
- Product Type
- Sealer, Waterborne Coating, Waterborne Sealant
- Sealer
- Waterborne Coating
- Waterborne Sealant
- Application Area
- Decorative Surfaces
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Brick
- Usage
- Natural Brick
- Manufactured Brick
- Ornamental Surfaces
- Storage
- Do not allow to freeze.
- Advantages
Ease of application - No mixing; Water repellent; Resists mildew & fungus growth; Allows vapor passage; Prolonged surface life; Maintains original surface characteristics, color & cleanliness; Reduces efflorescence and alkali attack; Increased freeze-thaw durability; Penetrates 1/4 to 3/4 of an inch; Improves weathering resistance of natural and manufactured brick products
- Application
NOTE: it is recommended that no more than a 50 square foot section be coated at a time to assure the first coat doesn't dry before 2nd coat is applied.
- Limitations
MOXIE 1300 Brick Selaer should not be applied on moist or wet surfaces. Do not apply in direct sunlight. Do not apply in windy conditions. Do not apply if ambient temperatures are below 50° F / 10°C.
- Preparation
All construction faults and cracks should be repaired properly. All surfaces should be thoroughly cleaned, rinsed, and dry. After a rainfall, allow a minimum of 72 hours for surfaces to dry before application of sealer. Do not apply in damp, moist weather. New brick mortar should age at least 30 days before application. Pressure wash new mortar residue from brick surface. MOXIE 1300 BRICK SEALER will react with any mortar residue and produce a white surface.
- Technology
- Ready-to-Use Products
- Coverage Rates
For two coat coverage estimate 50-100 ft² per gallon, depending on substrate porosity; Hard fired, new brick, 75-100 ft² per gallon; Porous, old, weathered brick, 50-75 ft² per gallon
- Sustainability
Building for future generations – The Moxie technology strengthens the inner structure of concrete and leads to longer lasting quality structures; LEED Certification – Moxie Shield 1300 increases available LEED credits for projects; Zero VOC (EPA 24 VOC) – The Moxie technology is based on inorganic compounds; Non-Toxic / Non-Hazardous – The liquid Moxie Shield 1300 is not toxic or hazardous and when protecting concrete from moisture intrusion. Moxie Shield 1300 will not release toxic or hazardous emissions; Water-Based – The technology is a water base carrier for inorganic ingredients
- Labeling Claims
- Non-Flammable
- Safety and Health
Avoid contact with eyes. Due to ph level do not allow this product to come in contact with plant life or leather. Do not allow product to come in contact with glass, porcelain or ceramic tile, aluminum, zinc or galvanized steel, remove with a damp cloth immediately. Product will permanently etch or erode the smooth surface. Must be rinsed with water or removed with damp cloth immediately.
- Performance Data
Moxie Shield 1300 liquid penetrating brick sealer has been used on building and construction materials for over 40 years to prevent moisture intrusion, while preserving surface integrity of the substrate.
