MOXIE SHIELD 1400 Surface Sealer
Moxie Shield 1400 is a ready to use, non-toxic, penetrating water repellent formulated for all types of large pore masonry, block, stucco and concrete. Prevents water and moisture penetration on vertical, above grade, block and masonry surfaces and is suitable for interior and exterior decorative applications, providing long-term protection.
Product families
- Primers & Sealers
Other characteristics
- Brand
- MOXIE SHIELD
- Features
Alkali Resistant, Breathable, Corrosion Resistant, Easy To Apply, Efflorescence Control, Excellent Water Repellency , Freeze/Thaw Stability, Fungus Resistant, Good Penetration, Good Weather Stability, Long Term Protection, Low Moisture Vapor Transmission, Low Water Permeability, Mildew Resistant, Non-Toxic, Service Life Extension
- Product Type
- Sealer, Waterborne Sealant
- Sealer
- Waterborne Sealant
- Application Area
- Decorative Surfaces
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Masonry
- Usage
- Concrete Masonry Units
- Stucco
- Gunite
- Shotcrete
- Mortar
- Grout
- Ornamental Surfaces
- Carrier
- Water
- Storage
- Do not allow to freeze.
- Advantages
Ease of application - No mixing; Water repellent; Prevents mildew & fungus growth; Prevents lichen, moss and other surface accretions; Prolonged surface life; Reduces deterioration and penetration of contaminates; Increased freeze-thaw durability, reducing flaking, scaling and spalling; Resists rust, clay and waterborne contaminant stains; Reduces internal chlorides Maintains original color & cleanliness; Improves weathering resistance; Reduces efflorescence and alkali attack
- Limitations
MOXIE 1400 Brick Selaer should not be applied on moist or wet surfaces. Do not apply in direct sunlight. Do not apply in windy conditions. Do not apply if ambient temperatures are below 50° F / 10°C.
- Preparation
All construction faults and cracks should be repaired properly. Surfaces should be thoroughly cleaned, rinsed and dry. Do not use detergents. Before application of sealer allow 72 hours after a rainfall for surfaces to dry. Thoroughly mix sealer before use.
- Technology
- Ready-to-Use Products
- Coverage Rates
For two coat coverage estimate 50-100 ft² per gallon, depending on substrate porosity
- Sustainability
Building for future generations – The Moxie technology strengthens the inner structure of concrete and leads to longer lasting quality structures; LEED Certification – Moxie Shield 1400 increases available LEED credits for projects; Zero VOC (EPA 24 VOC) – The Moxie technology is based on inorganic compounds; Non-Toxic / Non-Hazardous – The liquid Moxie Shield 1400 is not toxic or hazardous and when protecting concrete from moisture intrusion. Moxie Shield 1400 will not release toxic or hazardous emissions; Water-Based – The technology is a water base carrier for inorganic ingredients
- Labeling Claims
- Non-Flammable
- VOC-free
- Safety and Health
Avoid contact with eyes. Due to ph level do not allow this product to come in contact with plant life or leather. Do not allow product to come in contact with glass, porcelain or ceramic tile, aluminum, zinc or galvanized steel, remove with a damp cloth immediately. Product will permanently etch or erode the smooth surface. Must be rinsed with water or removed with damp cloth immediately.
- Performance Data
Moxie Shield 1400 liquid penetrating brick sealer has been used on building and construction materials for over 40 years to prevent moisture intrusion, while preserving surface integrity of the substrate.
