MOXIE SHIELD 1500 Concrete Sealer
Moxie Shield 1500 Concrete Sealer is a ready to use, multipurpose and permanent penetrating liquid sealer/hardener, specifically formulated to penetrate up to six inches and seal concrete for the prevention of water vapor migration and alkali efflorescence, protecting and preserving concrete and masonry against moisture causing problems.
Other characteristics
- Brand
- MOXIE SHIELD
- Features
Acid Resistant, Alkali Resistant, Corrosion Resistant, Efflorescence Control, Freeze/Thaw Stability, Fungus Resistant, Good Weather Stability, High Dust Control, High Hardness, Long Term Protection, Low Moisture Vapor Transmission, Mildew Resistant
- Product Type
- Sealer, Waterborne Coating
- Sealer
- Waterborne Coating
- Application Area
- Pipes, Pool
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Concrete, Masonry, Metal, Steel
- Usage
- Arenas
- Basements
- Bridges
- Concrete pipes
- Foundations
- High subgrade moisture conditions
- Levees & dams
- Moisture/Acid exposed surfaces
- Markets
- Building & Construction
- Industrial
- Storage
Store above 40°F in a tightly closed container. If frozen, thoroughly agitate before use. Do not use compressed air, product may foam. Indefinite shelf life.
- Advantages
Stops moisture and vapor migration; Resists reinforcing steel corrosion and deterioration; Improves weathering resistance; Negative and/or positive side application; Dust-proofs the surface; Resists hydrostatic pressure up to 100 psi; Resists chloride intrusion; Dramatically increases surface hardness; Prevents efflorescence; Increases freeze-thaw durability (exceeds 600 cycles); Prevents mildew and fungi; Resists acid attack; Adds density and bond strength; Penetration of up to 6 inches; Cures concrete uniformly; Preserves and prepares masonry for paints, coatings and adhesives
- Limitations
For exterior applications, do not apply in rain, wind, or extreme conditions. Do not apply if the ambient/surface temperature is below 50ºF or above 85ºF on existing concrete. In controlled environments, the ideal ambient/surface temperature is 68ºF - 78ºF. Do not apply to fresh concrete (less than 28 days) if a calcium chloride accelerator was used. Do not apply in windy conditions.
- Technology
- Ready-to-Use Products
- Coverage Rates
For two coat horizontal coverage estimate 150-200 ft² per gallon. For two coat vertical coverage estimate 100-125 ft² per gallon. If using as a curing compound, apply one coat at the rate of one gallon per 250-300 ft² after the final finish. For a moisture vapor barrier, alkali efflorescence, or pH oriented application apply a second application on day two
- Packaging Type
- Drums
- Totes (IBC)
- Sustainability
Building for future generations – The Moxie technology strengthens the inner structure of concrete and leads to longer lasting quality structures; LEED Certification – Moxie Shield 1400 increases available LEED credits for projects; Zero VOC (EPA 24 VOC) – The Moxie technology is based on inorganic compounds; Non-Toxic / Non-Hazardous – The liquid Moxie Shield 1400 is not toxic or hazardous and when protecting concrete from moisture intrusion. Moxie Shield 1400 will not release toxic or hazardous emissions; Water-Based – The technology is a water base carrier for inorganic ingredients
- Labeling Claims
- VOC-free
