MOXIE SHIELD MFSII Flooring Sealer
Moxie Shield MFSII is a ready to use, multipurpose and permanent penetrating liquid sealer/hardener specificall formulated for the flooring industry an specialty applications, to stop water vapor migration and alkali efflorescence attack unde flooring materials and other impermeabl surface treatments.
Product families
- Floor Coatings
Other characteristics
- Brand
- MOXIE SHIELD
- Features
Alkali Resistant, Efflorescence Control, Freeze/Thaw Stability, Fungus Resistant, Gasoline Resistant, Low Moisture Vapor Transmission, Mildew Resistant, Mold Resistance, Non-Toxic, Oil Resistant, Solvent Resistant, Stain Resistant
- Product Type
- Sealer, Waterborne Coating
- Sealer
- Waterborne Coating
- Compatible Substrates & Surfaces
- Masonry, Metal, Steel
- Usage
- Normal-weight/Lightweight Concrete
- Moisture/Acid exposed surfaces
- High subgrade moisture conditions
- Flooring Remediation
- Finished Concrete Protection
- Surface Adhered Floor Coverings
- Efflorescence Sequestration
- Carrier
- Water
- Markets
- Building & Construction
- Storage
Store above 40°F in a tightly closed container. If frozen, thoroughly agitate before use. Do not use compressed air, product may foam. Indefinite shelf life.
- Advantages
Stops water vapor transmission and water migration; Prevents mold, mildew and fungi; Suitable for above and below grade application; Withstands Hydrostatic Pressure up to 100 psi (231 ft. below grade); Prevents surface dusting; Dramatically reduces time required for installation of flooring materials; Resists marine chlorides, oil, gasoline, acids and solvents; Prevents chloride intrusion; Increases freeze-thaw durability (exceeds 600 cycles); Prevents reinforcing steel corrosion; Prevents efflorescence attack; Prepares concrete for paintings, coatings and adhesives; Penetrates concrete up to 6 inches; Prevents corrosion and deterioration of concrete
- Limitations
Moxie Shield MFSII Flooring Sealer will seal against a hydrostatic pressure and vapor pressure; however, any source of water must be diverted or stopped before application. Very damp or cold conditions may extend drying times. Higher temperatures will shorten drying times. Do not apply if the ambient temperature is below 65°F. Do not apply to fresh concrete (less than 28 days) if a calcium chloride accelerator was used.
- Technology
- Ready-to-Use Products
- Coverage Rates
For a two coat horizontal coverage, estimate approximately 150-200 ft² per gallon on the first coat. The second coat will use about half the amount of the first coat. Three coats or more will be required on very porous concrete. High moisture vapor emissions (12 lbs/1000 ft²/24 hrs to 26 lbs/1000 ft²/24 hrs or higher) will require additional applications, resulting in longer chemical reaction and drying time.
- Packaging Type
- Drums
- Totes (IBC)
- Sustainability
Building for future generations – The Moxie technology strengthens the inner structure of concrete and leads to longer lasting quality structures; LEED Certification – – Moxie Shield MFSII Flooring Sealer increases available LEED credits for projects; Zero VOC (EPA 24 VOC) – The Moxie technology is based on inorganic compounds; Non-Toxic / Non-Hazardous – The Moxie Shield MFSII Flooring Sealer is not toxic or hazardous and when protecting concrete from moisture intrusion. Moxie Shield MFSII Flooring Sealer will not release toxic or hazardous emissions; Water-Based – The technology is a water base carrier for inorganic ingredients
- Labeling Claims
- VOC-free
- Safety and Health
Avoid contact with eyes. Due to the high pH level, do not allow this product to come in contact with plant life or leather. Do not allow product to come in contact with glass, porcelain or ceramic tile, aluminum, zinc, or galvanized steel. Remove with running water or a damp cloth immediately. Product will leave a hard white residue, or permanently etch/ erode glass and smooth surfaces.
