LIOPTAL 541
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Alkyds, Alkyds (Modified)AlkydsAlkyds (Modified)
LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Due to its composition, LIOPTAL 541 is a special-purpose binder for air and stove drying primers with very short drying times and excellent overspray tolerance. It has applications in primers and lacquers, industrial coatings, industrial maintenance, marine coatings, and transportation.
Product families
Applications
- Marine Coatings
- Marine Coatings
- Industrial Coatings
- Industrial Maintenance
- Metal Coatings
- Primers & Lacquers
- Primers & Lacquers
- Marine
Product Families
- Alkyds
Other characteristics
- Brand
- LIOPTAL
- End Uses
- Primer
- Compatible Substrates & Surfaces
- Metal
- Carrier
- Solvent-based
- Markets
- Automotive & Transportation
- Paints & Coatings
- Printing & Packaging
- Composition
This product has a Composition of appr. 42 % phthalate resin This product has a Composition of appr. 38 % tall oil/wood oil This product has a Composition of appr. 20 % modified resins.
- Cure
- Chemical Cure
- Supplied As
- 60 % in xylene
- Technology
- CASE Ingredients
- Coating End Applications
- Primer
- Compatible Polymers and Resins
- Alkyds
- Epoxies (EP)
- Film Properties and Processing
Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination with other short-oil or medium-oil drying alkyd resin, epoxy esters and urea or melamine resins a wide range of possibilities are obtained not only in the primer sector but also for fast-drying industrial coatings. For prime coats and anti-corrosive primers the type and amount of pigments are of vital importance. Besides zinc phosphate and red iron oxide particularly flaked fillers, such as talc, have given good results. Possible dryers are primarily cobalt-lead-manganese or cobalt-barium-zinc mixtures. Relative to 100% alkyd resin we recommend the following amounts depending on the intended use: 0.03- 0.05 % cobalt, 0.30-0.50 % lead- and 0.03-0.04 % manganese metal.
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Non Volatile Content | 60.0 | w % | AV-F-F003 |
| Acid Value | max. 25 | mg KOH/g | — |
| Color | max. 25 | Iodine | — |
| Density | 1.01 | g/ml | AV-F-0D001 |
| Flash Point | 32.0 | °C | AV-F-f006 |
| Flow Time | 140-200 | seconds | AV-F-V003 |
