SYNTHOESTER 1130
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Polyesters
SYNTHOESTER 1130 is a saturated polyester containing hydroxyl groups, modified with non-drying fatty acids. It is used in combination with isocyanate pre-polymers, such as Desmodur L, IL, HL, N, and VL, for air-drying two-component polyurethane coatings. It has applications in wood flooring, furniture coatings, industrial coatings, and wood coatings and finishes.
Product families
Applications
- Consumer Goods — Furniture
- Wood Coatings & Finishes
- Wood Flooring
- Furniture Coatings
- Industrial Coatings
Product Families
- Polyesters
Other characteristics
- Brand
- SYNTHOESTER
- End Uses
- Solventless & High Solids Coating
- Compatible Substrates & Surfaces
- Wood
- Markets
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Storage
SYNTHOESTER 1130 should be stored in the closed conatiners, protected from moisture, unlimited shelf life.
- Cure
- Chemical Cure
- Supplied As
- A = 75% in xylene B = 75% in butyl acetate
- Technology
- CASE Ingredients
- Coating End Applications
- Solventless & High Solids Coating
- Compatible Polymers and Resins
- Nitrocellulose
- Polyurethanes (PU)
- Properties and Fields of use
SYNTHOESTER 1130 is used in combination with isocyanate pre-polymers, such as Desmodur L, IL, HL, N, VL, for air-drying two-component polyurethane coatings. Synthoester 1130 is especially suitable for fast drying polyurethane coatings in combination with Desmodur IL or HL. The low OH-content makes relatively long pot lives of mixtures possible, providing very good application possibilities with casting machines.
- Compatible Substrates and Surfaces
- Wood
- Mixing ratio with poly-isocyanates
100 parts by wt of Synthoester 1130/75% (form in which supplied) are equivalten of the following amounts of Desmodur: Desmodur HL 60 70 parts by wt. Desmodur IL 50 92 parts by wt. Desmodur L 67 64 parts by wt. Desmodur L 75 57 parts by wt. Desmodur N 45 parts by wt. Desmodur VL 25 parts by wt. The amount of Desmodur added may deviate by +/- 20% from the equivalent amount. For primers and intermediates coats, undercuring, and for topcoats exposed to unusual conditions, overcuring is recommended.
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 1.300-1.500 | mPas | AV-F-V005 |
| Acid Value | max. 15 | mg KOH/g | — |
| Color | max. 4 | Iodine | — |
| Density | 1.05 | g/ml | AV-F-0D001 |
| Flash Point | 32.0 | °C | AV-F-f006 |
| Hydroxyl Content | 128-152 | % | Relative to NVC |
| Hydroxyl Content | approx. 4.3 | % | AV-F-H003 |
| Non Volatile Content | 75.0 | w % | AV-F-F003 |
