SYNTHALAT E 405
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Alkyds, Alkyds (Short Oil)AlkydsAlkyds (Short Oil)
SYNTHALAT E 405 is a short-oil, non-drying alkyd resin. It is suitable for nitrocellulose wood finishes with a good body. It offers good solvent evaporation and sandability. It can also be used as a colorless and pigmented acid-curing wood finish with a combination of urea resins. It has applications in furniture, wood flooring, furniture coatings, and industrial coatings.
Product families
Applications
- Consumer Goods — Furniture
- Wood Coatings & Finishes
- Wood Flooring
- Furniture Coatings
- Industrial Coatings
Product Families
- Alkyds
Other characteristics
- Brand
- SYNTHALAT
- Compatible Substrates & Surfaces
- Wood
- Carrier
- Solvent-based
- Markets
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Composition
This product has a Composition appr. 59 % phthalate resin appr. 41 % peanut oil fatty acid (triglyceride).
- Cure
- Chemical Cure
- Supplied As
- A = 60 % in xylene B = 75 % in butyl acetate
- Technology
- CASE Ingredients
- Film Properties and Processing
Synthalat E 405, a very low viscosity non-drying alkyd resin, is primarily intended for the manufacture of full bodied wood and furniture coatings based on nitrocellulose. The rapid solvent evaporation of these types of nitrocellulose-Synthalat E 405 lacquers is a special characteristic which meets the higher demands of machine processing. Quickly sandable coatings have a very fast sandability when suitable zinc sterate types are incorporated that also meets the requirements of automatic sanding machines. In topcoats Synthalat E 405 gives paint films a very high gloss and surface hardness and very good body. In addition, these types of coatings have a very good light stability, so that Synthalat E 405 can also be used for the coating of lighter species of wood. Synthalat E 405 is also very suitable for the manufacure of acid curing wood finishes. In this case it is combined with unplasticized urea or melamine resins in a ratio of 6:4 to 7:3. All common dilute acids or acid salts can be used as the catalyst.
- Compatible Substrates and Surfaces
- Wood
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Non Volatile Content | 60.0 | w % | AV-F-F003 |
| Acid Value | max. 10 | mg KOH/g | — |
| Color | max. 5 | Iodine | — |
| Density | approx. 1.01 | g/ml | AV-F-0D001 |
| Flash Point | approx. 28 | °C | AV-F-f006 |
| Flow Time | 90-110 | seconds | AV-F-V003 |
