AFCONA 2025
- CASE Ingredients Features
- Good Compatibility
- Chemical Family
- Silicones
AFCONA 2025 is a moderate defoamer with minimal side effects that prevents the formation of foam and blisters during manufacturing and application. It offers a combination of good defoaming and compatibility with most resin systems, and is recommended for medium-viscosity applications applied by spray and brush.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Defoamer
Product families
Applications
- Vehicle Refinish
- Vehicle Refinish
Product Families
- Foam Control
Other characteristics
- Brand
- AFCONA
- End Uses
2K (2 component) Coating, Lacquers, Solventborne Coating
- Functions
- Defoamer
- Compatible Polymers & Resins
Acrylics, Alkyds, Chlorinated Rubbers, Epoxies (EP), Nitrocellulose, Polyesters, Polyurethanes (PU)
- Carrier
- Cyclohexanone
- Markets
- Automotive & Transportation
- Paints & Coatings
- Appearance
- Slightly yellowish to transparent liquid
- Technology
- CASE Ingredients
- Product Features
AFCONA-2025, AFCONA-2035 and AFCONA 2040 have similar chemical structures with different modifications. However, their performance is very different in some systems. We recommend customers try all three products to select the most suitable defoamer for their system.. AFCONA-2025 is recommended for brush and conventional spray applications. It is very suitable for systems ranging from low polarity to high polarity.
- Application Methods
- Brush
- Spray
- Country Availability
- Canada
- USA
- Coating End Applications
- 2K (2 component) Coating
- Lacquers
- Solventborne Coating
- Recommended Applications
Air-drying alkyd systems and physical drying systems based on acrylic, vinyl or chlorinated polymers; Polyurethane systems for wood, plastic and car refinish; NC lacquers and acid-curing for wood coatings and general industrial; 2-pack solvent-based epoxy; Heat-cured coatings based on alkyd, acrylic and saturated polyester
- Compatible Polymers and Resins
- Acrylics
- Alkyds
- Chlorinated Rubbers
- Epoxies (EP)
- Nitrocellulose
- Polyesters
- Polyurethanes (PU)
- Compatible Substrates and Surfaces
- Plastics
- Wood
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 20°C) | 0.94 - 0.96 | g/cm³ |
| Refractive Index | 1.445 - 1.455 | — |
| Flash Point | 42.0 | °C |
