Melos PC 31-010
- CASE Ingredients Features
- Excellent Adhesion
- Chemical Family
- Polyurethanes (PU)
Melos PC 31-010 is a solvent-free, single-component MDI-based polyurethane binder. It cures with moisture and is designed for the production of elastic rubber granule base layers for sports surfaces. It shows an excellent adhesion to SBR and EPDM rubber.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
- Polyurethanes (PU)
Other characteristics
- End Uses
- 1K (1 Component) Adhesive
- Features
- Excellent Adhesion
- Compatible Substrates & Surfaces
- Elastomers & Rubbers
- Markets
- Consumer Goods
- Storage
Store PC 31-010 in a dry and cool place. Shelf life of product stored in unopened original containers is 6 months. Protect contents against moisture. After prolonged storage, examine the suitability of PC 31-010. Close opened containers carefully, protect contents against moisture and use as soon as possible.
- PACKAGING
- 210 kg Drum or 1.050 kg Container
- Cure
- Moisture Cure
- Applications
- Consumer Goods — Sports & Recreation
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Labeling Claims
- Solvent-free
- Safety Guidelines
Smoking and open light is strictly prohibited during the application process. Adequate ventilation or use of a respirator is required in enclosed spaces. Wear approved eye protection and gloves during application. Should contact occur with eyes or skin, wash thoroughly with soap and water. If irritation persists, obtain medical attention.
- Adhesive & Sealant Type
- 1K (1 Component) Adhesive
- Installation Guidelines
The surface to be coated must be clean, dry and free of oil, grease, dirt and foreign residue. To obtain optimum adhesion we recommend using a primer (e.g. PC 11-010). Use PC 31-010 as supplied and mix it with dry rubber granules as follows:; _x0001_ 20 parts per weight PC 31-010; _x0001_ 100 parts per weight rubber granules; This mixture can be applied with specially designed pavers in order to obtain uniform, flat surfaces. Cure Time The cure time varies with temperature and humidity. High temperatures and high humidity will decrease cure time while low temperatures and low humidity will increase it.
- Certifications and Compliance
- ISO 14001
- ISO 45001
- ISO 50001
- ISO 9001
- Compatible Polymers and Resins
- Styrene Butadiene Rubber (SBR)
- Compatible Substrates and Surfaces
- Elastomers & Rubbers
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 23°C) | 1.05 - 1.15 | g/cm³ |
| Viscosity (at 23°C) | 2900 ± 700 | mPas |
| Cure Time (at 20°C) (50% Relative Humidity) | 2021-10-12 | Hours |
| Humidity | 40 - 90 | % |
| Processing Temperature | 8 - 40 | °C |
