Melos PC 11-010
- Chemical Family
- Polyurethanes (PU)
Melos PC 11-010 is a solvent free, single-component polyurethane primer. It is designed for the adhesion between asphalt, concrete and elastic layers and between elastic layers (retopping).
Product families
Applications
- Concrete Coatings & Stains
Product Families
- Primers & Sealers
Other characteristics
- Features
- Improved Adhesion
- Product Type
1K (1 component) Coating, Primer, Solventless & High Solids Coating; 1K (1 component) Coating; Primer; Solventless & High Solids Coating
- Compatible Substrates & Surfaces
- Asphalt, Concrete
- Color
- Transparent
- Markets
- Paints & Coatings
- Storage
Store PC 11-010 in a dry and cool place but not below 10 °C. Shelf life of product stored in original unopened containers is 4 months. Close partial containers carefully, protected against moisture and use as soon as possible.
- PACKAGING
- 200 kg Drum, 25 kg Pail
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Labeling Claims
- Solvent-free
- Safety Guidelines
Never use PC 11-010 near flames or open light. Smoking is also strictly prohibited during the application process. Wear approved eye protection and gloves during application. Adequate ventilation or use of a respirator is required in enclosed spaces. We recommend Polycomp cleaner (PC 11-040 – Butyl acetate) for the cleaning of the equipment.
- Installation Guidelines
Open time of the applied primer is about 4-6 hours. If this period is exceeded, apply a new primer coat to achieve an optimum adhesion. PC 11-010 is moisture-sensitive. To obtain a uniform coverage, apply PC 11-010 at a rate of 100-150 g/m². If less primer is applied, adhesion decreases; exceeding the recommended amount may damage the asphalt.
- Certifications and Compliance
- ISO 14001
- ISO 45001
- ISO 50001
- ISO 9001
- Ready to Use Product Features
- Improved Adhesion
- Compatible Substrates and Surfaces
- Asphalt
- Concrete
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 23°C) | 0.98 - 1.02 | g/cm³ |
| Viscosity (at 23°C) | 220 ± 70 | mPas |
| Curing Time (at 20°C) (50% Relative Humidity) | 4 - 6 | Hours |
| Flash Point | 62.0 | °C |
| Nco-Content | 8 ± 0,5 | % |
| Processing Temperature | min. 10 | °C |
