Melos PC 61-050
- Chemical Family
- Polyurethanes (PU)
Melos PC 61-050 is a one-component, transparent, water-based polyurethane-based varnish. PC 61-050 has a very good adhesion to PUR-bound rubber surfaces. It was designed to protect the water permeable and – impermeable, structured sports surfaces from color fading.
Product families
- Stains & Varnishes
- Top Coats
Other characteristics
- Features
Bacteria Resistant, Excellent Transparency Properties, Good Adhesion, Low Slip, Matting
- Product Type
- 1K (1 component) Coating, Top Coat, Varnishes
- 1K (1 component) Coating
- Top Coat
- Varnishes
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Elastomers & Rubbers, Polyurethane
- Color
- Transparent
- Markets
- Consumer Goods
- Paints & Coatings
- Storage
PC 61-050 should be stored in a dry and cool place. Shelf life of product in unopened original containers is 6 months. PC 61-050 needs to be protected from frost. Opened containers have to be closed carefully.
- PACKAGING
- 110-kg-Drums or 20-kg-Plastic Pails
- Applications
Paints & Coatings — Other Paints & Coatings Applications; Consumer Goods — Sports & Recreation
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Safety Guidelines
Inhaling spray vapors is hazardous to your health. Application indoors thus requires adequate ventilation. Use a mask when applying this coating. Approved eye protection and gloves are recommended during application. Never eat or smoke during application. Keep away from naked flames.
- Application Methods
- Spray
- Installation Guidelines
Homogenize PC 61-050 using a powered agitator. The processing temperature should be between 15 and 28 °C. Apply the varnish evenly in the requested thickness with an airless spraying machine. Only install in dry weather conditions. Protect the surface from moisture for approx. 5 hours after spraying. The varnish can be diluted with 5 – 10 % of water to achieve a better spraying viscosity at lower temperatures. Consumption: For structured sports surfaces: 750 – 800 g/m² For even surfaces: 400 – 500 g/m² Please spray the recommended quantities in two steps – one time from the left, one time from the right – to achieve an even result.
- Certifications and Compliance
- ISO 14001
- ISO 45001
- ISO 50001
- ISO 9001
- Ready to Use Product Features
- Bacteria Resistant
- Excellent Transparency Properties
- Good Adhesion
- Low Slip
- Matting
- Compatible Substrates and Surfaces
- Elastomers & Rubbers
- Polyurethane
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Hardness | 50 - 60 | Shore A |
| Density (at 20°C) | 1,02 | g/m³ |
| Viscosity (at 20°C) | 1000 ± 400 | mPas |
| Flash Point | min. 190 | °C |
| Setting Point (Protect From Frost) | min. 5 - max. 30 | °C |
| Processing Temperature | min. 15 | °C |
