Induron Coatings E-BOND 100 PENETRATING SEALER
- Chemical Family
- Epoxy & Epoxy Derivatives
E-Bond 100 Penetrating Sealer is a very low viscosity, two component epoxy specially formulated to penetrate and seal concrete, masonry, rusted steel and most chalky coatings. It is available in amber clear and non-opaque off-white. When used as recommended, it is 100% solids, zero VOC, and will not shrink or entrap solvent upon curing.
Product families
- Primers & Sealers
Other characteristics
- Features
Chemical Resistant, Good Adhesion, Good Penetration, Low Surface Tension, Low Viscosity
- Product Type
2K (2 component) Coating, Epoxy Coating, Sealer, Solventless & High Solids Coating; 2K (2 component) Coating; Epoxy Coating; Sealer; Solventless & High Solids Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Carbon Steel, Masonry, Metal, Steel
- Usage
The very low surface tension and penetrating properties of E-Bond 100 will bond rust, penetrate discontinuities and holidays in old coatings and provide exceptional adhesion to any aged, corroded, or rusted substrate. The penetrating action will reinforce and bond heavy rust. When blasting is not practical or economically feasible, E-Bond 100 seals and unifies the surface of the substrate allowing the application of an appropriate coating system. E-Bond 100 will penetrate concrete, mitigating outgassing and improves the bond of epoxy topcoats. E-Bond 100 will perform as a one-coat sealer for concrete floors, sealing out oils and gas and making clean-up easier. E-Bond 100 is ideal as a primer for masonry swimming pools. Topcoat with Induron epoxies, urethanes, Aquanaut II and Induraguard 9200.
- Note
Thicker films will not cause problems and may be used to fill small pits.
- Color
- Off White
- Markets
- Building & Construction
- Paints & Coatings
- Limitations
Not for service above 200°F (93°C). This product should be topcoated in most service. E-Bond 100 will turn amber if not topcoated.
- Safety Data
This product is formulated free of lead, mercury, chromates and solvents.
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Application Methods
- Brush
- Roller
- Spray
- HIGHLIGHTS
100% Solids – Very low stress. No VOC's.; Penetrates and seals rust and chalk.; Penetrates concrete, mitigates outgassing and improves adhesion.; Excellent chemical resistance.; A universal primer and tie coat.; Recoat with most Induron protective coatings.; Convenient 1:1 blend ratio.
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Volume Solids | 100.0 | % |
| Solids (by Weight) | 100.0 | % |
| Weight | 8.7 - 9.1 | lbs/gallon |
| Volatile Organic Contents | None | — |
Table 2 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Coverage (Theoretical, at 1.0 mil dry film thickness) | 1604.0 | sq. ft/gal |
| Dry Film Thickness | 1.0 - 2.0 | mils per coat. |
| Wet Film Thickness | 1.0 - 2.0 | mils |
| Dry Time to Handle or Recoat (50°F or higher) | Overnight | — |
| Dry Time to Handle or Recoat (40°F-50°F) | Second day | — |
