Induron Coatings INDURAGUARD 9200
InduraGuard 9200 is a high-solids, high-build, single-component, self-priming one-coat solution for weathered galavanized and previously painted structures. It is ideal for a single coat application on transmission towers, substation structures, quanset huts, chain-link fencing, and other aged galvanized structures. InduraGuard 9200 is a modified linseed oil, metallic and ceramic pigmented coating designed for maximum corrosion protection over minimal surface preparation. InduraGuard 9200 provides excellent wetting, is easy to apply by airless spray, roller, brush or paint mitt, and can be applied up to 12 mils DFT in a single coat.
Product families
- Protective Coatings
Other characteristics
- Features
Corrosion Resistant, Excellent Wetting Behaviour, High Solids Content, Self-Priming
- Product Type
- 1K (1 component) Coating
- Application Method
- Brush, Roller, Spray
- Usage
To be used for painting weathered galvanized or previously painted surfaces of transmission or communications towers, poles, substation structures, chain link fencing, buildings and railroad bridges.
- Note
Lower temperature, higher film build, and/or poor ventilation will retard dry time.
- Markets
- Building & Construction
- Electrical & Electronics
- Limitations
Not intended for immersion service, severe industrial exposures, new galvanized structures, severe acid or alkali environments, surfaces subject to splash or spillage of acids, alkalies or solvents. Do not use for surface temperatures above 200º F.
- Safety Data
This product is formulated free of lead, chromates, mercury or other toxic pigments.
- Technology
- Ready-to-Use Products
- Application Methods
- Brush
- Roller
- Spray
- Surface Preparation
The surface to be coated must be dry, clean and free of contamination. Mininum surface preparation is SSPC-SP2 Hand Tool Cleaning. Can be applied to previously painted surfaces in sound condition.
- Ready to Use Product Features
- Corrosion Resistant
- Excellent Wetting Behaviour
- High Solids Content
- Self-Priming
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Volume Solids | 90 - 94 | % |
| Weight (Depending on Color) | 13.1 - 15.9 | lbs/per gallon |
| Volatile Organic Contents (Unthinned) | 0.6 (70) | lbs/gallon (grams/liter) |
| Volatile Organic Contents (Thinned (10%)) | 1.1 (135) | lbs/gallon (grams/liter) |
Table 2 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coverage (Theoretical, at 1.0 mil dry film thickness) | 1475.0 | sq. ft/gal | — |
| Dry Film Thickness | 8.0 - 12.0 | mils | — |
| Wet Film Thickness | 8.5 - 13.0 | mils | — |
| Storage Temperature | 35 - 100 | º F | — |
| Dry Time to Touch (Air dry, 77º F) | 12 - 24 | hours | ASTM D5895 |
| Dry Time to Handle | 48 - 72 | hours | — |
| Dry Time to Recoat | 30 - 60 | Days | — |
