To catalogue
DENSETEC HMW
- Chemical Family
- PolyethylenesPolyolefins
Densetec HMW is the extruded material needed when Densetec HDPE is not enough and Polyslick UHMW is not necessary. Densetec HMW has higher impact strength than HDPE and is more abrasion resistant. The fact that Densetec HMW is more wear resistant than standard HDPE, and is more economical than standard UHMW makes it the ideal material for wear applications and machined parts. It may also be used in applications such as snowplow linings and fertilizer spreaders.
Product families
Applications
- Building & Construction — Other Building & Construction Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Paper & Pulp
- Other Paper & Pulp Applications
Automotive & Transportation — Transportation
- Commercial
Other characteristics
- Brand
- DENSETEC
- Density
- 948.0 - 948.0 kg/m³
- Features
Abrasion Resistant, Chemical Resistant, Crack Resistant, Good Impact Strength, Good Sliding Properties, Low Friction, Low Temperature Flexibility, Moisture Resistant, Wear Resistant
- Polymer Name
- High Molecular Weight Polyethylene (HMWPE)
- Markets
- Automotive & Transportation
- Building & Construction
- Industrial
- Key Features
- Noise reduction.
- Low temp properties.
- Good sliding qualities.
- Stress crack resistant.
- RoHS & REACH compliant.
- Moisture resistant.
- Low coef of friction.
- High impact strength.
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Abrasion Resistant
- Chemical Resistant
- Crack Resistant
- Good Impact Strength
- Good Sliding Properties
- Low Friction
- Low Temperature Flexibility
- Moisture Resistant
- Recommended Applications
- Bins.
- Hoppers.
- Ice Rink Floors.
- Reclaim Hoppers.
- Wear Applications.
- Chutes.
- Conveyors.
- Silo Liners.
- Certifications and Compliance
- REACH (Europe)
- RoHS Compliant
- Plastics and Elastomers End Uses
- Machine/Mechanical Parts
- Pipes
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Brittleness Temperature | max. -75 | °C | ASTM-D746 |
| Density | 0.948 | g/cc | ASTM-D1505 |
| Durometer Hardness | 68 | Shore D | ASTM-D2240 |
| Elongation at Break | 700 | % | ASTM-D638 |
| ESCR, Condition A & B (100% lgepal). F50 | min 600 | hours | ASTM-D1693 |
| Fire Rating | UL 94 | HB | — |
| Flexural Modulus | 1207 | MPa | ASTM-D790 |
| Heat Deflection at 66 psi | 78 | °C | ASTM-D648 |
| Melt Flow Rate (HLMI) | 10 / 10 | g / min | ASTM-D1238 |
| Potable Water Standards | Meets Standards 14 & 61 | — | NSF International |
| Tensile Impact Strength | 190 | KJ/m2 | ASTM-D1822 |
| Tensile Strength at Yield | 24.8 | MPa | ASTM-D638 |
