ULTRAPOLY LUNS
- Chemical Family
- PolyethylenesPolyolefins
ULTRAPOLY LUNS technology initially developed for the United States Navy has been scaled down for commercial use. New to the Ultra Non-Skid® family is Luns permanent non-skid sheet. These non-skid technologies are a direct replacement for non-skid tapes and paints for industrial applications. The product has a wear and impact resistant baseplate of ultra high molecular polyethylene (UHMW-PE). The surface of the sheet is covered with anti-skid material comprised of slag.
Properties
- Physical Form
- Sheets
Product families
- Fence Decks & Rails
- Commercial
- Marine
Other characteristics
- Brand
- Nytef Plastics ULTRAPOLY
- Density
- 932.0 - 932.0 kg/m³
- Features
Anti-Slip, Impact Resistance, Non Corrosive, Wear Resistant
- Polymer Name
Ultra High Molecular Weight Polyethylene (UHMWPE)
- Markets
- Automotive & Transportation
- Building & Construction
- Key Features
More aggressive anti-skid than Braxx.; Safeguards pedestrian and vehicular slip hazard areas.; Virtually permanent.; Maintenance free.; Installs easily over wood, concrete, steel and aluminum.; Will not corrode or rot.; Eliminates paint or tape.; Impact resistant.
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Anti-Slip
- Impact Resistance
- Non Corrosive
- Wear Resistant
- Recommended Applications
- Stair Treads.
- Marina Gangways.
- Wheel Chair Ramps.
- Pedestrian Walkways.
- Vehicular Anti-Slipping.
- Forklift Inclines and Dock Plates.
- Plastics and Elastomers End Uses
- Safety Guards
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Point | 271 | °F | — |
| Coef. Of Linear Thermal Expansion | 8.3 x 10^-5 | in/in/°F | ASTM-D696 |
| Flammability | HB (1/8 inch) | — | UL-94 |
Table 2 of 3
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Abrasion Resistance | 10 | — | — |
| Coefficient of Friction, Kinetic | min. 0.75 | — | ASTM-D1894 |
| Coefficient of Friction, Static | min. 0.75 | — | ASTM-D1894 |
| Density | 0.932 | g/cc | ASTM-D792 |
| Durometer Hardness | 64 | Shore D | ASTM-D2240 |
| Elongation at Break | 300 | % | ASTM-D638 |
| Izod Impact Srength | min. 100 | KJ/m2 | ASTM-D4020, Method A |
| Tensile Strength at Yield | 3500 | psi | ASTM-D638 |
| Water Absorbtion at Saturation | 0.01 | % | ASTM-D570 |
Table 3 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Constant | 2.3 | — | ASTM-D150 |
| Dielectric Strength | 90.3 | KV/m | ASTM-D149 |
| Surface Resistivity | 1 X 10^12 | ohm | ASTM-D257 |
| Volume Resistivity | 1 X 10^14 | ohm-cm | ASTM-D257 |
