To catalogue
DENSETEC HDPE
- Chemical Family
- PolyethylenesPolyolefins
Densetec HDPE (High Density Polyethelyne) sheet exhibits the properties of high impact strength, abrasion resistance, and low coefficient of friction. The material is also moisture, stain and odor resistant, and is FDA approved to be used in the food processing industry. The material's durability makes it ideally suited for a variety of applications such as water tanks, chute linings and numerous industrial uses.
Properties
- Physical Form
- Sheets
Product families
Applications
- Consumer Goods — Furniture; Consumer Goods — Other Consumer Goods Applications
Agriculture & Feed — Animal Health & Nutrition
- Feed Production & Processing
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Food & Nutrition — Processing & Packaging
- Food & Beverage Manufacturing
- Other Processing & Packaging Applications
Other characteristics
- Brand
- DENSETEC
- Density
- 955.0 - 955.0 kg/m³
- Features
Good Abrasion Resistance, Good Stain Resistance, High Impact Performance, Low Friction, Moisture Resistant
- Polymer Name
- High Density Polyethylene (HDPE)
- Markets
- Agriculture & Feed
- Consumer Goods
- Food & Nutrition
- Industrial
- Key Features
- Stain resistant.
- Lightweight.
- Grafitti resistant.
- Moisture resistant.
- RoHS & REACH compliant.
- Low coefficient of friction.
- Durable.
- Odor resistant.
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Good Abrasion Resistance
- Good Stain Resistance
- High Impact Performance
- Low Friction
- Moisture Resistant
- Recommended Applications
- Furniture.
- Tank Liners.
- Chute Liners.
- Wood Replacement.
- Silo and Hopper Liners.
- Light Duty Chain Guides.
- Art; Water Storage.
- Machine Parts.
- Certifications and Compliance
- FDA Compliant
- Plastics and Elastomers End Uses
- Agricultural Tanks
- Chemical Process
- Furniture
- Industrial Tanks
- Machine/Mechanical Parts
- Tanks
- Valve Parts
Technical data
Table 1 of 4
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength Yield | 27.6 | MPa | ASTM-D638 |
| Ultimate Elongation | min. 600 | % | ASTM-D638 |
| Tensile Impact Strength | 147 | KJ/m2 | ASTM-D1822 |
| Notched Izod Impact Strength | 159 | J/m | ASTM-D256 |
| Compressive Stress | 10.3 | MPa | ASTM-D695 |
| ESCR | 45 | hours | ASTM-D1693 |
| ESCR | 35 | hours | ASTM-D1693 |
| Durometer Hardness | 64 | Shore D | ASTM-D2240 |
| Flexural Modulus | 1379 | MPa | ASTM-D790 |
| Coefficient of Friction, Static | 0.31 | — | ASTM-D1894 |
| Coefficient of Friction, Kinetic | 0.22 | — | ASTM-D1894 |
Table 2 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.955 | g/cc | ASTM-D1505 |
| Melt Index | 0.25 | g/10 min | ASTM-D1238 |
Table 3 of 4
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coef. Of Linear Thermal Expansion | 1.26 x 10^-4 | cm/cm/°C | ASTM-E831 |
| Decomposition Temperature | 345 | °C | Union Carbide |
| Vicat Softening Temperature | 125 | °C | ASTM-D1525 |
| Heat Deflection Temperature | 77 | °C | ASTM-D648 |
| Brittleness Temperature | max. -84 | °C | ASTM-D746 |
| Glass Transition Temperature | -125 | °C | Union Carbide |
| Continuous Use Temp. | -73 to 82 | °C | — |
| Thermal Conductivity | 0.35 | W/m-°K | Private Test |
| Burn Rate | 25.4 | mm/min | ASTM-D635 |
| Ignition Temperature, Flash Conditions | 341 | °C | ASTM-D1929 |
| Ignition Temperature, Self Ignition Conditions | 349 | °C | ASTM-D1929 |
| Flame Spread | 98 | — | E84 Tunnel Test |
Table 4 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Constant | 2.35 | — | ASTM-D150 |
| Dielectric Strength | 20.1 | KV/mm | ASTM-D149 |
| Volume Resistivity | min. 6 x 10^15 | ohm-cm | ASTM-D257 |
