DENSETEC PARTITION
- Chemical Family
- PolyethylenesPolyolefins
Densetec Partition Board is the ideal partition material for a wide variety of commercial applications such as schools, parks, stadiums, office buildings and airports. The durability of our material makes it immune to such problems as vandalism and constant traffic. In addition, the material is totally unaffected by water and humidity preventing it from shrinking, expanding, bowing, warping or delaminating in any way whatsoever. It is resistant to markings by pens, pencils, most markers and paints and cleans with ordinary household detergent or solvents for more stubborn stains. Minor surface damage can easily be repaired. Finally, the material does not have to be painted and is virtually maintenance free.
Properties
- Physical Form
- Sheets
Product families
- Consumer Goods — Furniture
- Pools & Landscaping
- Displays
Other characteristics
- Brand
- DENSETEC
- Density
- 955.0 - 955.0 kg/m³
- Features
Crack Resistant, Delamination Resistant, Good Machinability, Good Moisture Resistance, Good Scratch Resistance, Good Stain Resistance
- Polymer Name
- High Density Polyethylene (HDPE)
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Key Features
Will not crack.; Scratch resistant.; Moisture resistant.; Never needs painting.; RoHS & REACH compliant.; Will not splinter.; Easily machined.; Will not delaminate.; Stain and graffiti resistant.; Unlimited design potential.; ASTM E84 Class A and B formulations also available.
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Quality Standards
- Other Quality Standards
- Material Features
- Crack Resistant
- Delamination Resistant
- Good Machinability
- Good Moisture Resistance
- Good Scratch Resistance
- Good Stain Resistance
- Recommended Applications
- Racks.
- Lockers.
- Benches.
- Furniture.
- Table Tops.
- Shelves.
- Dividers.
- Displays.
- Certifications and Compliance
- REACH (Europe)
- RoHS Compliant
- Plastics and Elastomers End Uses
- Counter Top Flatstocks
- Displays
- Furniture
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 4
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength Yield | 27.6 | MPa | ASTM-D638 |
| Ultimate Elongation | min. 600 | % | ASTM-D638 |
| Tensile Impact Strength | 147 | KJ/m2 | ASTM-D1822 |
| Notched Izod Impact Strength | 159 | J/m | ASTM-D256 |
| Compressive Stress | 10.3 | MPa | ASTM-D695 |
| ESCR | 45 | hours | ASTM-D1693 |
| ESCR | 35 | hours | ASTM-D1693 |
| Durometer Hardness | 64 | Shore D | ASTM-D2240 |
| Flexural Modulus | 1379 | MPa | ASTM-D790 |
| Coefficient of Friction, Static | 0.31 | — | ASTM-D1894 |
| Coefficient of Friction, Kinetic | 0.22 | — | ASTM-D1894 |
Table 2 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.955 | g/cc | ASTM-D1505 |
| Melt Index | 0.25 | g/10 min | ASTM-D1238 |
Table 3 of 4
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coef. Of Linear Thermal Expansion | 1.26 x 10^-4 | cm/cm/°C | ASTM-E831 |
| Decomposition Temperature | 345 | °C | Union Carbide |
| Vicat Softening Temperature | 125 | °C | ASTM-D1525 |
| Heat Deflection Temperature | 77 | °C | ASTM-D648 |
| Brittleness Temperature | max. -84 | °C | ASTM-D746 |
| Glass Transition Temperature | -125 | °C | Union Carbide |
| Continuous Use Temp. | -73 to 82 | °C | — |
| Thermal Conductivity | 0.35 | W/m-°K | Private Test |
| Burn Rate | 25.4 | mm/min | ASTM-D635 |
| Ignition Temperature, Flash Conditions | 341 | °C | ASTM-D1929 |
| Ignition Temperature, Self Ignition Conditions | 349 | °C | ASTM-D1929 |
| Flame Spread | 98 | — | E84 Tunnel Test |
Table 4 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Constant | 2.35 | — | ASTM-D150 |
| Dielectric Strength | 20.1 | KV/mm | ASTM-D149 |
| Volume Resistivity | min. 6 x 10^15 | ohm-cm | ASTM-D257 |
