To catalogue
AVALANCHE MEDIUM DUTY LINERS
- Chemical Family
- PolyethylenesPolyolefins
AVALANCHE MEDIUM DUTY LINERS is manufactured from a high molecular weight (HMW) polyethylene extrusion. This plastic liner is designed for lighter hauling, and is subsequently priced more cost-effectively than our heavier duty dump truck liners. The Mid-Grade dump truck liner ranges from 1/4” to 1/2” thickness, and can be manufactured in widths from 1’ to 16’. We recommend against hauling any asphalt with this grade of dump truck liner.
Product families
Automotive & Transportation — Transportation
- Commercial
Other characteristics
- Brand
- AVALANCHE
- Density
- 948.0 - 948.0 kg/m³
- Features
Cost Effective, Good Sliding Properties, Good UV Protection, Water Resistant
- Polymer Name
- High Molecular Weight Polyethylene (HMWPE)
- Markets
- Automotive & Transportation
- Key Features
- HMW-PE.
- Tough liner for dirt, clay or farm commodities.
- Good sliding surface.
- Economic solution.
- UV protection.
- Eliminates freezing.
- Added water protection
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Cost Effective
- Good Sliding Properties
- Good UV Protection
- Water Resistant
- Recommended Applications
- Hopper Liners.
- Blacktop Liners.
- Gravity Box Liners.
- Dump Truck Liners.
- Forage Box Liners.
- Forage Wagon Liners.
- Manure Spreader Liners.
- Air Boat Hull Bottom Liners.
- Plastics and Elastomers End Uses
- Bed Liners
- Truck Liners
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Brittleness Temperature | max. -75 | °C | ASTM-D746 |
| Density | 0.948 | g/cc | ASTM-D1505 |
| Durometer Hardness | 68 | Shore D | ASTM-D2240 |
| Elongation at Break | 700 | % | ASTM-D638 |
| ESCR, Condition A & B (100% lgepal). F50 | min 600 | hours | ASTM-D1693 |
| Fire Rating | UL 94 | HB | — |
| Flexural Modulus | 1207 | MPa | ASTM-D790 |
| Heat Deflection at 66 psi | 78 | °C | ASTM-D648 |
| Melt Flow Rate (HLMI) | 10 / 10 | g / min | ASTM-D1238 |
| Potable Water Standards | Meets Standards 14 & 61 | — | NSF International |
| Tensile Impact Strength | 190 | KJ/m2 | ASTM-D1822 |
| Tensile Strength at Yield | 24.8 | MPa | ASTM-D638 |
