POLYSLICK FLEXI FEND
- Chemical Family
- PolyethylenesPolyolefins
POLYSLICK FLEXI FEND unique leaf spring shape of Flexi Fend allows it to flex with impact and return to shape with no permanent damage. Fenders fully recover from repeated collisions and heavy loads. Made of lightweight UHMWPE, Flexi Fend installs easily and is virtually maintenance free.
Properties
- Physical Form
- Sheets
Product families
- Exterior & Body
- Marine
Other characteristics
- Brand
- POLYSLICK
- Density
- 932.0 - 932.0 kg/m³
- Features
Good Impact Strength, High Energy Absorption, Non Corrosive, Oil Resistant, Reduced Installation Time, Salt Water/Spray Resistant
- Polymer Name
Ultra High Molecular Weight Polyethylene (UHMWPE)
- Markets
- Automotive & Transportation
- Key Features
Non-marking.; Non-grabbing.; Absorbs energy.; Impervious to salt water and oil.; Leaf shape allows it to flex with impact and return to shape with no permanent damage.; High visibility.; Easy installation.; Will not corrode, rot or splinter.; US Patent nos. 6,832,570 / 6,948,440 / 7,624,694 / 8,029,209
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Good Impact Strength
- High Energy Absorption
- Non Corrosive
- Oil Resistant
- Reduced Installation Time
- Salt Water/Spray Resistant
- Recommended Applications
- Dock Facings.
- Bridge Fenders.
- Boat Rails and Gunnels.
- Canal Lock Door Panels.
- Lock and Dam Guidewall.
- Dry Dock Walls and Side Rails.
- Floating Docks.
- Pipeline Fenders.
- Plastics and Elastomers End Uses
- Fenders
Technical data
Table 1 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Point | 271 | °F | — |
| Coef. Of Linear Thermal Expansion | 8.3 X 10^-5 | in/in/°F | ASTM-D696 |
| Flammability | HB (1/8 inch) | — | UL-94 |
Table 2 of 3
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Abrasion Resistance | 10 | — | — |
| Coefficient of Friction, Kinetic | 0.15 | — | UL410 |
| Coefficient of Friction, Static | 0.2 | — | UL410 |
| Density | 0.932 | g/cc | ASTM-D792 |
| Durometer Hardness | 64 | Shore D | ASTM-D2240 |
| Elongation at Break | 300 | % | ASTM-D638 |
| Izod Impact Srength | min. 100 | KJ/m2 | ASTM-D4020, Method A |
| Tensile Strength at Yield | 3500 | psi | ASTM-D638 |
| Water Absorbtion at Saturation | 0.01 | % | ASTM-D570 |
Table 3 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Constant | 2.3 | — | ASTM-D150 |
| Dielectric Strength | 90.3 | KV/m | ASTM-D149 |
| Surface Resistivity | 1 X 10^12 | ohm | ASTM-D257 |
| Volume Resistivity | 1 X 10^14 | ohm-cm | ASTM-D257 |
