To catalogue
AVALANCHE HEAVY DUTY LINERS
- Chemical Family
- PolyethylenesPolyolefins
AVALANCHE HEAVY DUTY LINERS is manufactured from an ultra-high molecular weight (UHMW) polyethylene extrusion to produce a plastic liner designed for heavy-duty hauling. When compared to HMW liners, UHMW liners are 3-5X more resistant to wear. Heavy-Duty liners are suitable for larger rock and heavier hauling. The Heavy-Duty liner ranges from 1/4” to 3/4” thickness, and can be manufactured in widths from 1’ to 16’ feet wide. We recommend against hauling any asphalt with this grade of liner. This liner can withstand temperatures up to 180 degrees Fahrenheit.
Properties
- Physical Form
- Film, Solid
- Film
- Solid
Product families
Building & Construction — Building Materials
- Structural Components
Automotive & Transportation — Transportation
- Commercial
Other characteristics
- Brand
- AVALANCHE
- Color
- Black, Grey
- Black
- Grey
- Density
- 932.0 - 932.0 kg/m³
- Features
Excellent Surface Properties, Good Impact Strength, Good UV Protection, Water Resistant, Wear Resistant
- Polymer Name
Ultra High Molecular Weight Polyethylene (UHMWPE)
- Markets
- Automotive & Transportation
- Building & Construction
- Key Features
- Compression molded UHMW-PE
- Better sliding surface
- High impact strength
- 3-4 times more wear than HMW
- Temp. range: +180° F to -86° F
- 5 year warranty available
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Excellent Surface Properties
- Good Impact Strength
- Good UV Protection
- Water Resistant
- Wear Resistant
- Recommended Applications
- Hopper Liners.
- Blacktop Liners.
- Gravity Box Liners.
- Dump Truck Liners.
- Forage Box Liners.
- Forage Wagon Liners.
- Manure Spreader Liners.
- Air Boat Hull Bottom Liners.
- Plastics and Elastomers End Uses
- Bed Liners
- Truck Liners
- Plastics and Elastomers Processing Methods
- Compression Molding
- Extrusion
Technical data
Table 1 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Point | 270 - 280 | °F | — |
| Coef. Of Linear Thermal Expansion | 7 X 10^-6 | in/in/°F | ASTM-D696 |
| Flammability | HB (1/8 inch) | — | UL-94 |
Table 2 of 3
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.932 | g/cc | ASTM-D792 |
| Tensile Strength at Yield | 3300 | psi | ASTM-D638 |
| Elongation at Break | 240 | % | ASTM-D638 |
| Coefficient of Friction, Static | 0.25 | — | ASTM-D1894 |
| Coefficient of Friction, Kinetic | 0.2 | — | ASTM-D1894 |
| Abrasion Resistance | 9 | — | — |
| Izod Impact Srength | min. 80 | KJ/m2 | ASTM-D4020, Method A |
| Durometer Hardness | 66 | Shore D | ASTM-D2240 |
| Water Absorbtion at Saturation | 0.01 | % | ASTM-D570 |
| Thickness | 0.25 - 0.50 (6 - 12.7) | Inch (mm) | — |
Table 3 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Constant | 2.3 | — | ASTM-D150 |
| Dielectric Strength | 90.3 | KV/m | ASTM-D149 |
| Surface Resistivity | 1 X 10^12 | ohm | ASTM-D257 |
| Volume Resistivity | 1 X 10^14 | ohm-cm | ASTM-D257 |
