Westcoat SC-70F Acrylic Lacquer Flat Sealer
- Chemical Family
- Acrylics & Acrylates
Westcoat SC-70F Acrylic Lacquer Flat Sealer is a clear, single component, VOC-compliant solvenated lacquer sealer and glaze. It is a very hard acrylic polymer that is UV and stain resistant and is designed to protect and beautify concrete substrates. The solvent base can help the material to penetrate and adhere to concrete. It will darken the substrate and produce a flat or “natural look”.
Other characteristics
- Features
Excellent Substrate Adhesion, Fast Drying, High Hardness, Low VOC, Matte Finish, Stain Resistant, UV Resistant
- Product Type
- 1K (1 component) Coating, Lacquers, Sealer
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete
- Usage
SC-70F is designed to seal, protect and create a "natural look" on concrete and cementitious coatings.. Perfect to seal and glaze stamped concrete and acrylic cement toppings, such as Westcoat TextureCrete® or Westcoat's waterproofing systems with a custom finish.
- Color
- Transparent
- Mixing
- Stir prior to use.
- Markets
- Paints & Coatings
- Clean Up
Uncured material should be removed with an environmentally-safe solvent.; Cured material should be removed mechanically.
- Coverage
Will vary depending on the surface.; Up to 400 square feet per gallon on a smooth surface and between 200-300 square feet per gallon on a rough surface.
- Dry Time
For best results, allow the product 4-6 hours drying time at 70 degrees before permitting light pedestrian traffic or additional coats are applied.; Allow 24 hours to cure before heavy traffic is permitted.; Allow 48 hours before heavy objects are placed on the surface and allow 72 hours for vehicular traffic.; Allow 5 days prior to any abrasion or chemical exposure.
- Moisture
All concrete should be tested for moisture before applying a seamless coating.. If moisture emissions exceed 5 lbs/1000 square feet/24 hours (ASTM F1869) or if the relative humidity (RH) exceeds 75% (ASTM F2170), contact the manufacturer before application.
- Thinning
The material may be thinned by adding up to a maximum of one quart of water per gallon, for the first coat.. For best results, it is not recommended to thin the final coat.
- PACKAGING
- 5 gal pail
- Advantages
- Fast Drying
- Flat Sheen
- VOC Compliant
- Easy to Use
- Excellent Adhesion
- UV Resistant
- Lacquer Finish
- Easy to Re-coat
- Inspection
Substrate must be clean, dry, and free of grease, paint, oil, dust, curing agents, or any foreign material that will prevent proper adhesion.; Over previously coated systems, surface must be structurally sound with no peeling or flaking.; Over sheet metal, metal should be bonderized, clean and free of rust.; If galvanized metal is used, it must be free of oil and abraded.
- Shelf LIfe
- 5 years in unopened packaging
- Limitations
This product is designed for professional use only.; Apply in thin coats.; Concrete must be free of sealers, wax, or curing agents.; Be sure to paper off any areas that you do not want stained.; Will not hide imperfections or stains in concrete.; Fast stain will stain concrete and can produce a mottled look. Colors and effects will vary.; Do not allow any westcoat products to freeze.; Read product specification sheets for every product you will be using before beginning the project.; Stains are translucent and somewhat transparent.; For interior use only.; Caution: when mixed with acetone, product is extremely flammable
Technical data
Table 1 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 8.44 | lbs/gal |
| Flash Point | 34.0 | °F |
| Gloss (60Degrees) | max. 5 | — |
| Solids By Volume | 26.73 | % |
| Solids By Weight | 26.73 | % |
| Specific Gravity | 1.1 | — |
| Viscosity | 140.0 | cPs |
| Viscosity | 45 - 55 | KU |
Table 2 of 2
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion on Concrete (7day Cure) | 4.0 | — | ASTM D3359 |
| Foot Traffic (Over Concrete, 72°F, 1st Coat) | 20.0 | minutes | — |
| Foot Traffic (Sealed Surface, 72°F) | 23.0 | minutes | — |
| Full Cure (6mil) | 72.0 | hours | — |
| Pencil Hardness | HB | — | — |
| Reducer/Clean Up | Acetone | — | — |
| Sag & Leveling | 5.0 | — | ASTM D4400 |
| Tack Free (Over Concrete, 72°F, 6mils) | 10.0 | minutes | — |
| VOC Content | max. 100 | gm/l | — |
