Release ST9 HM Dry

Properties

Physical Form

• Powder
• Solid

Product families

Other characteristics

Brand

Release

End Uses

Hot Melt Adhesive, Waterborne Adhesive

Functions

Release Agent

Compatible Polymers & Resins

Polyolefins, Polypropylenes (PP)

Markets

• Adhesives & Sealants
• Paints & Coatings
• Printing & Packaging

Handling

The best performance has been obtained with 0.5-0.6 g (dry)/sqm coating weight. Concentration shall be adjusted accordingly with the coating system. For standard applications, we suggest diluting with toluene (or hexane)/IPA (75/25) at 12% and coating 4-5 g (wet)/sqm on flame treated BOPP film (minimum 42 dynes/cm). It is important to note that, being RELEASE ST9 HM DRY a heterogeneous product, the content of one single bag should be completely used up, without splitting its content into different batches. Application temperature of the solution shall preferably be between 30 and 40°C, and never below 20°C. Stir well before use. Coating must be perfectly dry (less than 0.6 g/sqm of residual solvent). Hot-melt adhesives can be coated directly on line on the other treated side of the BOPP film.

Show in full

Shelf LIfe

24 Months

Technology

CASE Ingredients

Packaging Type

Drums

Packaging and Storing

The product is packed in fiber drums, containing 5 kg PE bags.; Use within 24 months from production date (unopened and in the original packaging).

Adhesive & Sealant Type

• Hot Melt Adhesive
• Waterborne Adhesive

Compatible Polymers and Resins

• Polyolefins
• Polypropylenes (PP)