Release W 40 HA8
- CASE Ingredients Features
- Water Resistance
- Chemical Family
- Acrylics & Acrylates
RELEASE W 40 HA8 is a water-borne release agent, based on synthetic acrylic polymers compouded with additives, capable to grant very high water repellency to the film.
Identification
- CASE Ingredients Functions
- Release Agent
Product families
- Functional Additives
Other characteristics
- Brand
- Release
- End Uses
- Hot Melt Adhesive, Solventborne Adhesive
- Features
- Water Resistance
- Functions
- Release Agent
- Carrier
- Water
- Markets
- Adhesives & Sealants
- Handling
Quantity to apply depends on substrate porosity: from 3 to 5 g dry/sqm (on coated paper we suggest 3 g dry/sqm). Methods: Meyer bar, Reverse Roll, Roto gravure, Air knife. The product can be either thickened (acrylic thickeners) or diluted. It is advised to heat the product for a few seconds at 150°C in order to achieve the highest properties of releasing and hydrophobicity. However, results are good (but inferior) even at lower temperatures. Aging properties are excellent.
- Shelf LIfe
- 9 Months
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Totes (IBC)
- Packaging and Storing
The product is supplied in iron drums (200 kg); IBC containers (1000 kg).. Despite a good freeze-thaw stability, keep material preferably at temperatures between +5°C and +40°C; avoid direct sunlight. When stored for over one month, product must be stirred for 10 - 15 minutes before use. Use within 9 months from production date (unopened and in the original packaging).
- Adhesive & Sealant Type
- Hot Melt Adhesive
- Solventborne Adhesive
- Compatible Substrates and Surfaces
- Fibers & Fabrics
- Paper
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Total Solids | 40±1 | % |
| Solvents | water | — |
| pH | 8 - 9 | — |
| Brookfield Viscosity 25°C | 600 - 1,2001 | mPa.s |
